Anisotropic grain growth and crack propagation in eutectic microstructure under cyclic temperature annealing in flip-chip SnPb composite solder joints
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
28 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
25 | en_US |
dc.citation.volume |
69 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Liang, Y. C. | en_US |
dc.contributor.author |
Lin, H. W. | en_US |
dc.contributor.author |
Chen, H. P. | en_US |
dc.contributor.author |
Chen, C. | en_US |
dc.contributor.author |
Tu, K. N. | en_US |
dc.contributor.author |
Lai, Y. S. | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:30:34Z | |
dc.date.available |
2014-12-08T15:30:34Z | |
dc.date.issued |
2013-07-01 | en_US |
dc.description.abstract |
The evolution of eutectic structure under temperature cycling tests (TCTs) in SnPb composite solder joints has been investigated. After 500 cycles of TCT, the Sn grains coarsened and developed anisotropic stripes close to the necking site in the solder joint because of stress-induced atomic migration. Then, cracks triggered by thermal stress were observed to propagate along the Sn stripe interfaces. After a prolonged 14,410 cycles of TCT, the cracks expanded across the entire solder joint and led to electrical open failure. (c) 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.scriptamat.2013.03.018 | en_US |
dc.identifier.issn |
1359-6462 | en_US |
dc.identifier.journal |
SCRIPTA MATERIALIA | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.scriptamat.2013.03.018 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/21840 | |
dc.identifier.wosnumber |
WOS:000319545100007 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Stress migration | en_US |
dc.subject |
Diffusion | en_US |
dc.subject |
Temperature cycling test | en_US |
dc.subject |
SnPb composite solder joint | en_US |
dc.title |
Anisotropic grain growth and crack propagation in eutectic microstructure under cyclic temperature annealing in flip-chip SnPb composite solder joints | en_US |
dc.type |
Article | en_US |
檔案
- 000319545100007.pdf (798.8 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liang, Y. C., Lin, H. W., Chen, H. P., Chen, C., Tu, K. N., & Lai, Y. S. (2013). Anisotropic grain growth and crack propagation in eutectic microstructure under cyclic temperature annealing in flip-chip SnPb composite solder joints. SCRIPTA MATERIALIA, 69(1), 25–28. https://doi.org/10.1016/j.scriptamat.2013.03.018
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21840