Optical Mode Modulation of AlGaInP Multi Quantum Well Laser Diodes
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.volume |
8816 | en_US |
dc.contributor.author |
Hung, Chih-Tsang | en_US |
dc.contributor.author |
Huang, Shen-Che | en_US |
dc.contributor.author |
Lu, Tien-Chang | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2014-12-08T15:32:44Z | |
dc.date.available |
2014-12-08T15:32:44Z | |
dc.date.issued |
2013 | en_US |
dc.description.abstract |
We investigate the influence of passivation structure on the optical mode distribution and LI characteristics for the edge emitting AlGaInP-GaInP visible laser diode (LD). For traditional single-layer Si3N4 or SiO2 passivation designs, the modification of dielectric layer thickness can determinate the lateral near-field confinement and change the horizontal far-field (FF) divergence. By increasing the film thickness, the non-radiation absorption come from Au-Ti can be improved and it leads to a narrow FF divergence beam. As continue to increasing the thickness, thicker passivation provides a better confinement factor and then the far-field pattern turn to be wider. For LI characteristics, it is necessary to deposit a thick enough passivation to reduce metal absorption. However, it cause much thermal energy accumulated in the ridge waveguide and deteriorate the quantum efficiency as adopting a too thick dielectric layer. Finally, we demonstrate a high power AlGaInP-GaInP multi quantum wells (MQWs) LD adopted a high-reflectivity passivation to enhance the LI characteristics and keep a suitable far-field divergence angle simultaneously. Under the design of three-pair optical thin films, it cannot only avoid the metal absorption but also enhance emitting efficiency and heat dissipation by using a high reflective and good thermal conductive three-pair optical thin films, it cannot only avoid the metal absorption but also enhance emitting efficiency and heat dissipation by using a high reflective and good thermal conductive Al2O3/Ta2O5 multilayer. The measured room-temperature threshold current (I-th) and characteristic temperature (T-0) can be arrived 44.5mA and 104.2K at 16.4 degrees far-fielddivergence. | en_US |
dc.identifier.doi |
10.1117/12.2024042 | en_US |
dc.identifier.isbn |
978-0-8194-9666-9 | en_US |
dc.identifier.issn |
0277-786X | en_US |
dc.identifier.journal |
NANOENGINEERING: FABRICATION, PROPERTIES, OPTICS, AND DEVICES X | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1117/12.2024042 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/22863 | |
dc.identifier.wosnumber |
WOS:000325972900009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
AlGaInP | en_US |
dc.subject |
laser diodes | en_US |
dc.subject |
quantum-well lasers | en_US |
dc.subject |
dielectric layer | en_US |
dc.subject |
mode modulation | en_US |
dc.title |
Optical Mode Modulation of AlGaInP Multi Quantum Well Laser Diodes | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
- 000325972900009.pdf (1.72 MB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Hung, C.-T., Huang, S.-C., & Lu, T.-C. (2013). Optical Mode Modulation of AlGaInP Multi Quantum Well Laser Diodes. NANOENGINEERING: FABRICATION, PROPERTIES, OPTICS, AND DEVICES X, 8816. https://doi.org/10.1117/12.2024042
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/22863