A promising sputtering route for dense Cu2ZnSnS4 absorber films and their photovoltaic performance
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
282 | en_US |
dc.citation.issue |
en_US | |
dc.citation.spage |
275 | en_US |
dc.citation.volume |
128 | en_US |
dc.contributor.author |
Jheng, Bao-Tang | en_US |
dc.contributor.author |
Liu, Po-Tsun | en_US |
dc.contributor.author |
Wu, Meng-Chyi | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
顯示科技研究所 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.contributor.department |
Institute of Display | en_US |
dc.date.accessioned |
2014-12-08T15:36:41Z | |
dc.date.available |
2014-12-08T15:36:41Z | |
dc.date.issued |
2014-09-01 | en_US |
dc.description.abstract |
Copper zinc tin sulfide (Cu2ZnSnS4, CZTS) is highly abundant in nature. It is an important absorber material for the development of low-cost and sustainable next-generation I-2-II-IV-VI4 thin-film solar cells because it has a the tunable direct band gap energy, inexpensive constituent elements, and a large absorption coefficient in the visible wavelength region. This work develops an efficient one-step vacuum-based approach to depositing CZTS films without the need to supply excess sulfur during/after deposition or to perform any post-sulfurization treatment. This one-step RF sputtering process produces CZTS films that are crystalline, phase-pure, dense, smooth, and continuous. Air Mass 1.5 G power conversion efficiencies of as high as 6% have been achieved with an antireflection coating, demonstrating that this new approach has great potential as a low-cost alternative for high-efficiency CZTS solar cell production. (C) 2014 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.solmat.2014.05.033 | en_US |
dc.identifier.issn |
0927-0248 | en_US |
dc.identifier.journal |
SOLAR ENERGY MATERIALS AND SOLAR CELLS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.solmat.2014.05.033 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/25043 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Solar cell | en_US |
dc.subject |
Antireflective coating | en_US |
dc.subject |
Photoelectric devices | en_US |
dc.subject |
Zinc oxide | en_US |
dc.title |
A promising sputtering route for dense Cu2ZnSnS4 absorber films and their photovoltaic performance | en_US |
dc.type |
Article | en_US |
檔案
- 000340300500036.pdf (2.24 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Jheng, B.-T., Liu, P.-T., & Wu, M.-C. (2014). A promising sputtering route for dense Cu2ZnSnS4 absorber films and their photovoltaic performance. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 128, 275–282. https://doi.org/10.1016/j.solmat.2014.05.033
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/25043