Fabricating a micromould insert using a novel process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
684 | en_US |
dc.citation.issue |
7-8 | en_US |
dc.citation.spage |
678 | en_US |
dc.citation.volume |
25 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Chen, RH | en_US |
dc.contributor.author |
Chang, CC | en_US |
dc.contributor.author |
Cheng, CM | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:36:52Z | |
dc.date.available |
2014-12-08T15:36:52Z | |
dc.date.issued |
2005 | en_US |
dc.description.abstract |
A new method of fabricating micromould inserts that is compatible with semiconductor manufacturing is proposed. Diffusion of phosphorous at a high temperature is first used to increase the electric conductivity of the surface of the silicon wafer to generate a silicon-based seed layer for electroforming. If the process temperature and the duration of doping with phosphorous are controlled, then the electric conductivity of this novel silicon-based seed layer can be expected to equal that of a metal seed layer. Then, a structure layer of amorphous silicon is successfully formed onto the silicon-based seed layer, by plasma enhanced chemical vapor deposition (PECVD). The structure layer has none of the defects that would be present if a metal seed layer were used to replace the silicon-based seed layer. Finally, a silicon-based master microstructure was created by using ICPRIE to etch the structure layer. The silicon-based master has been demonstrated to be useable in successfully fabricating, by electroforming, a metal micromould insert with a large area and high aspect ratio. | en_US |
dc.identifier.doi |
10.1007/s00170-003-1889-2 | en_US |
dc.identifier.issn |
0268-3768 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s00170-003-1889-2 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/25266 | |
dc.identifier.wosnumber |
WOS:000228978700007 | |
dc.language.iso |
en_US | en_US |
dc.subject |
doping | en_US |
dc.subject |
electroforming | en_US |
dc.subject |
ICP-RIE | en_US |
dc.subject |
micromould insert | en_US |
dc.subject |
microstructures | en_US |
dc.subject |
PECVD | en_US |
dc.subject |
seed layer | en_US |
dc.title |
Fabricating a micromould insert using a novel process | en_US |
dc.type |
Article | en_US |
檔案
- 000228978700007.pdf (1.77 MB, Adobe PDF)
所屬典藏: 期刊論文