Fabricating thin-film transistors on plastic substrates using spin etching and device transfer
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
G233 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
G227 | en_US |
dc.citation.volume |
152 | en_US |
dc.citation.woscount |
4 | |
dc.contributor.author |
Wang, SC | en_US |
dc.contributor.author |
Yeh, CF | en_US |
dc.contributor.author |
Hsu, CT | en_US |
dc.contributor.author |
Lou, JC | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:37:09Z | |
dc.date.available |
2014-12-08T15:37:09Z | |
dc.date.issued |
2005 | en_US |
dc.description.abstract |
This work presents a novel method for transferring thin-film transistors (TFTs) from a Si wafer to another flexible plastic substrate. First, high-performance poly-Si TFTs were fabricated on a 1.5 mu m thick SiO2 on a Si wafer and then attached to a flexible plastic substrate by optical adhesive. Next, spin-etching was utilized to remove the backside Si, using SiO2 as a stopping layer. A qualitative model was established to explain the relationship between the chemical flow rate/rotation speed to the etching rate and the uniformity of Si removal. The Si etching rate exceeded 200 mu m/min while the Si to SiO2 selectivity of 250 was maintained given optimized spin-etching parameters. Substrate bonding and Si spin-etching steps caused no degradation or yield loss as compared to the electrical characteristics before transference. Additionally, extrinsic stress only weakly affected the properties of poly-Si resistors and TF`Ts on a flexible plastic substrate. (c) 2005 The Electrochemical Society. [DOI: 10. 1149/1.1860491] All rights reserved. | en_US |
dc.identifier.doi |
10.1149/1.1860491 | en_US |
dc.identifier.issn |
0013-4651 | en_US |
dc.identifier.journal |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1149/1.1860491 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/25527 | |
dc.identifier.wosnumber |
WOS:000227607300068 | |
dc.language.iso |
en_US | en_US |
dc.title |
Fabricating thin-film transistors on plastic substrates using spin etching and device transfer | en_US |
dc.type |
Article | en_US |
檔案
- 000227607300068.pdf (1.23 MB, Adobe PDF)
所屬典藏: 期刊論文