Electroless copper/nickel films deposited on AIN substrates
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
8266 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
8258 | en_US |
dc.citation.volume |
43 | en_US |
dc.citation.woscount |
7 | |
dc.contributor.author |
Liang, MW | en_US |
dc.contributor.author |
Hsieh, TE | en_US |
dc.contributor.author |
Chen, CC | en_US |
dc.contributor.author |
Hung, YT | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:37:14Z | |
dc.date.available |
2014-12-08T15:37:14Z | |
dc.date.issued |
2004-12-01 | en_US |
dc.description.abstract |
In this work, we studied the application of electroless copper/nickel (Cu/Ni) films deposited on aluminum nitride (AlN) substrates to high-frequency power GaAs device packaging. Experimental results showed metal films deposited on polished AlN surfaces possess a flatter surface, a finer grain structure, and a lower resistivity than those on unpolished surfaces. On unpolished AlN substrates, rough-surface-induced voids appear in the film interface during grain clustering, therefore deteriorating the electrical conductivity of the deposited layers. Pull-off tests revealed that the Cu/Ni films strongly adhered on both types of AlN substrates and that the adhesion strength exceeded 761 kg/cm(2). The Ni film remained a mixture of amorphous and microcrystalline structures, and the Cu film was polycrystalline. The resistivity of the Cu/Ni film was decreased by annealing process, which in turn decreased the number of crystal defects in the films. Subsequent Pb-Sn solder bumping experiments indicated the amorphous Ni(P) film was a good diffusion barrier layer since Sn could not diffuse through it. | en_US |
dc.identifier.doi |
10.1143/JJAP.43.8258 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.43.8258 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/25581 | |
dc.identifier.wosnumber |
WOS:000226035000069 | |
dc.language.iso |
en_US | en_US |
dc.subject |
electroless copper/nickel | en_US |
dc.subject |
aluminum nitride | en_US |
dc.subject |
surface roughness | en_US |
dc.subject |
diffusion barrier | en_US |
dc.subject |
flip chip | en_US |
dc.title |
Electroless copper/nickel films deposited on AIN substrates | en_US |
dc.type |
Article | en_US |
檔案
- 000226035000069.pdf (735.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liang, M., Hsieh, T., Chen, C., & Hung, Y. (2004). Electroless copper/nickel films deposited on AIN substrates. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 43(12), 8258–8266. https://doi.org/10.1143/JJAP.43.8258
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/25581