Electronic cam motion generation with special reference to constrained velocity, acceleration, and jerk
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
443 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
427 | en_US |
dc.citation.volume |
43 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Liao, CS | en_US |
dc.contributor.author |
Jeng, SL | en_US |
dc.contributor.author |
Chieng, WH | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:38:50Z | |
dc.date.available |
2014-12-08T15:38:50Z | |
dc.date.issued |
2004-07-01 | en_US |
dc.description.abstract |
Electronic cam motion involves velocity tracking control of the master motor and trajectory generation of the slave motor. Special concerns such as the limits of the velocity, acceleration, and jerk are beyond the considerations in the conventional electronic cam motion control. This study proposes the curve-fitting of a Lagrange polynomial to the cam profile, based on trajectory optimization by cubic B-spline interpolation. The proposed algorithms may yield a higher tracking precision than the conventional master-slaves control method does, providing an optimization problem is concerned. The optimization problem contains three dynamic constraints including velocity, acceleration, and jerk of the motor system. (C) 2004 ISA-The Instrumentation, Systems, and Automation Society. | en_US |
dc.identifier.issn |
0019-0578 | en_US |
dc.identifier.journal |
ISA TRANSACTIONS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/26593 | |
dc.identifier.wosnumber |
WOS:000222460300009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
electronic cam | en_US |
dc.subject |
tracking control | en_US |
dc.subject |
trajectory generation | en_US |
dc.subject |
trajectory optimization | en_US |
dc.subject |
master-slaves | en_US |
dc.title |
Electronic cam motion generation with special reference to constrained velocity, acceleration, and jerk | en_US |
dc.type |
Article | en_US |
檔案
- 000222460300009.pdf (628.9 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liao, C., Jeng, S., & Chieng, W. (2004). Electronic cam motion generation with special reference to constrained velocity, acceleration, and jerk. ISA TRANSACTIONS, 43(3), 427–443. https://ir.lib.nycu.edu.tw/handle/11536/26593
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/26593