A new method to extract MOSFET threshold voltage, effective channel length, and channel mobility using S-parameter measurement
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
732 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
726 | en_US |
dc.citation.volume |
E87C | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Chen, HY | en_US |
dc.contributor.author |
Chen, KM | en_US |
dc.contributor.author |
Huang, GW | en_US |
dc.contributor.author |
Chang, CY | en_US |
dc.contributor.author |
Huang, TY | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:39:17Z | |
dc.date.available |
2014-12-08T15:39:17Z | |
dc.date.issued |
2004-05-01 | en_US |
dc.description.abstract |
In this work, a simple method for extracting MOSFET threshold voltage, effective channel length and channel mobility by using S-parameter measurement is presented. In the new method, the dependence between the channel conductivity and applied gate voltage of the MOSFET device is cleverly utilized to extract the threshold voltage, while biasing the drain node of the device at zero voltage during measurement. Moreover, the effective channel length and channel mobility can also be obtained with the same measurement. Furthermore, all the physical parameters can be extracted directly on the modeling devices without relying on specifically designed test devices. Most important of all, only one S-parameter measurement is required for each device under test (DUT), making the proposed extraction method promising for automatic measurement applications. | en_US |
dc.identifier.issn |
0916-8524 | en_US |
dc.identifier.journal |
IEICE TRANSACTIONS ON ELECTRONICS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/26837 | |
dc.identifier.wosnumber |
WOS:000221445300013 | |
dc.language.iso |
en_US | en_US |
dc.subject |
threshold voltage | en_US |
dc.subject |
effective channel length | en_US |
dc.subject |
channel mobility | en_US |
dc.subject |
S-parameter | en_US |
dc.subject |
automatic measurement | en_US |
dc.title |
A new method to extract MOSFET threshold voltage, effective channel length, and channel mobility using S-parameter measurement | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chen, H., Chen, K., Huang, G., Chang, C., & Huang, T. (2004). A new method to extract MOSFET threshold voltage, effective channel length, and channel mobility using S-parameter measurement. IEICE TRANSACTIONS ON ELECTRONICS, E87C(5), 726–732. https://ir.lib.nycu.edu.tw/handle/11536/26837
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/26837