A vario-power ME architecture using content-based subsample algorithm
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
354 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
349 | en_US |
dc.citation.volume |
50 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Cheng, HW | en_US |
dc.contributor.author |
Dung, LR | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:39:41Z | |
dc.date.available |
2014-12-08T15:39:41Z | |
dc.date.issued |
2004-02-01 | en_US |
dc.description.abstract |
The Motion estimator is a key element in many video compression systems and it tends to dominate the power consumption in them. With increasing demand of portable, power-aware multimedia devices, an architecture that can be flexible in both power consumption and compression quality is essential. To meet this requirement, this paper presents a novel power-aware architecture, called the Vario-Power Architecture, for the motion estimation. Based on a semi-systolic array with the content-based subsample algorithm, the architecture real-time disables some processing elements to reduce power consumption. By performing the edge extraction first, a threshold is then set as the criterion of whether to enable or disable processing elements and thus the switch activities of the system can be reduced. As the simulation shows, the architecture may operate at different power consumption modes according to the remaining capacity of the battery pack, giving little quality degradation and the power overhead under 0.36%.(1) | en_US |
dc.identifier.doi |
10.1109/TCE.2004.1277884 | en_US |
dc.identifier.issn |
0098-3063 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON CONSUMER ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCE.2004.1277884 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27099 | |
dc.identifier.wosnumber |
WOS:000220257600052 | |
dc.language.iso |
en_US | en_US |
dc.subject |
motion estimation | en_US |
dc.subject |
VLSI architecture | en_US |
dc.subject |
video compression | en_US |
dc.subject |
power-aware architecture | en_US |
dc.subject |
subsample | en_US |
dc.title |
A vario-power ME architecture using content-based subsample algorithm | en_US |
dc.type |
Article | en_US |
檔案
- 000220257600052.pdf (774.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Cheng, H., & Dung, L. (2004). A vario-power ME architecture using content-based subsample algorithm. IEEE TRANSACTIONS ON CONSUMER ELECTRONICS, 50(1), 349–354. https://doi.org/10.1109/TCE.2004.1277884
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27099