Integration of a stack of two fluorine doped silicon oxide film with ULSI interconnect metallization
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
157 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
150 | en_US |
dc.citation.volume |
83 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Cheng, YL | en_US |
dc.contributor.author |
Wang, YL | en_US |
dc.contributor.author |
Liu, CP | en_US |
dc.contributor.author |
Wu, YL | en_US |
dc.contributor.author |
Lo, KY | en_US |
dc.contributor.author |
Liu, CW | en_US |
dc.contributor.author |
Lan, JK | en_US |
dc.contributor.author |
Ay, C | en_US |
dc.contributor.author |
Feng, MS | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:39:44Z | |
dc.date.available |
2014-12-08T15:39:44Z | |
dc.date.issued |
2004-01-15 | en_US |
dc.description.abstract |
Recently, fluorosilicate glass (FSG) has received much attention for application in microelectronics manufacturing due to its low dielectric constant and stable gap-filling ability. Although FSG films have been demonstrated as potential inter metal dielectrics (IMD) for sub-micron devices, integrating a stack of two fluorine doped silicon oxide film deposited on a high-density plasma chemical vapor deposition (HDP-CVD) system for gap filling and a plasma-enhanced chemical vapor deposition (PECVD) system for throughput has not been fully investigated. In this research, an excellent and exceptionally stable process was demonstrated for a stack of HDP-CVD FSG and PECVD FSG layers. Cracks that result from multi-level metal technology were eliminated when higher compressive stress PECVD FSG film was implemented as a capping layer. An 11% capacitance reduction was achieved when comparing a stack of FSG films to undoped silicon oxide. No problem occurred for photo, via etching and chemical mechanical polishing of FSG film. The FSG layer stack's via resistance (Rc(-)Via) as well as a full HDP-FSG scheme is comparable. These results are very promising for the integration of FSG films as inter metal dielectric for devices. (C) 2003 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.matchemphys.2003.08.023 | en_US |
dc.identifier.issn |
0254-0584 | en_US |
dc.identifier.journal |
MATERIALS CHEMISTRY AND PHYSICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.matchemphys.2003.08.023 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27135 | |
dc.identifier.wosnumber |
WOS:000187672000027 | |
dc.language.iso |
en_US | en_US |
dc.subject |
high density plasma (HDP) | en_US |
dc.subject |
fluorosilicate glass (FSG) | en_US |
dc.subject |
gap fill | en_US |
dc.subject |
capacitance | en_US |
dc.subject |
via resistance (Rc_Via) | en_US |
dc.subject |
plasma-enhanced chemical vapor deposition (PECVD) | en_US |
dc.title |
Integration of a stack of two fluorine doped silicon oxide film with ULSI interconnect metallization | en_US |
dc.type |
Article | en_US |
檔案
- 000187672000027.pdf (670.9 KB, Adobe PDF)
所屬典藏: 期刊論文