Fabrication of epitaxial ZnO films by atomic-layer deposition with interrupted flow
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1376 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
1373 | en_US |
dc.citation.volume |
518 | en_US |
dc.contributor.author |
Ku, Ching-Shun | en_US |
dc.contributor.author |
Huang, Jheng-Ming | en_US |
dc.contributor.author |
Lin, Chih-Ming | en_US |
dc.contributor.author |
Lee, Hsin-Yi | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:39:55Z | |
dc.date.available |
2014-12-08T15:39:55Z | |
dc.date.issued |
2009-12-31 | en_US |
dc.description.abstract |
We formed epitaxial ZnO thin films on a (0001) c-plane sapphire substrate through deposition of atomic layers (ALD) at 25-160 degrees C using diethylzinc (DEZn) and deionized water as precursors in combination with interrupted flow. High-resolution X-ray diffraction measurements were employed to characterize the microstructure of these films. With interrupted flow, we obtained ZnO thin films with an optimal growth window in a range of 40-160 degrees C, effectively decreasing the growth temperature by about 120 degrees C relative to a conventional method involving continuous flow. X-ray reflectivity measurements showed that the rate of growth increased also between 20 degrees C and 120 degrees C. The XRD results indicate that the stock time might extend the reaction of DEZn and water through an increased duration. All results show that a low temperature for growth improves the crystalline quality and is consistent with thermodynamically blocked self-compensation. (C) 2009 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2009.09.018 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2009.09.018 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27264 | |
dc.identifier.wosnumber |
WOS:000272861500004 | |
dc.language.iso |
en_US | en_US |
dc.subject |
ZnO | en_US |
dc.subject |
Atomic layer deposition | en_US |
dc.subject |
Flow-rate interruption | en_US |
dc.subject |
X-ray diffraction | en_US |
dc.title |
Fabrication of epitaxial ZnO films by atomic-layer deposition with interrupted flow | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000272861500004.pdf (369.0 KB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Ku, C.-S., Huang, J.-M., Lin, C.-M., & Lee, H.-Y. (2009). Fabrication of epitaxial ZnO films by atomic-layer deposition with interrupted flow. THIN SOLID FILMS, 518(5), 1373–1376. https://doi.org/10.1016/j.tsf.2009.09.018
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27264