Realization of transmission zeros in combline filters using an auxiliary inductively coupled ground plane
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2118 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
2112 | en_US |
dc.citation.volume |
51 | en_US |
dc.citation.woscount |
46 | |
dc.contributor.author |
Tang, CW | en_US |
dc.contributor.author |
Lin, YC | en_US |
dc.contributor.author |
Chang, CY | en_US |
dc.contributor.department |
電信工程研究所 | zh_TW |
dc.contributor.department |
Institute of Communications Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:40:14Z | |
dc.date.available |
2014-12-08T15:40:14Z | |
dc.date.issued |
2003-10-01 | en_US |
dc.description.abstract |
The out-band transmission zeros of the multilayer low-temperature co-fired ceramic bandpass filter are studied in this paper. The design target of this filter, with the passband between 2.3-2.65 GHz (the true application is 2.4-2.483 GHz), is to reject the local oscillator and image signals and, in the mean time, to suppress the harmonic frequency. This filter is a modified three-pole combline filter, which can easily achieve a high rejection rate and low insertion loss. The source-load coupling capacitor incorporation with cross-coupling grounding inductors can generate three transmission zeros. By properly adjusting the inductance values of the inductors between three resonators and ground can easily manipulate the transmission zero at a high-side skirt to suppress the harmonic frequency. The measured results match well with the electromagnetic simulation that evidences the feasibility of the proposed design. | en_US |
dc.identifier.doi |
10.1109/TMTT.2003.817447 | en_US |
dc.identifier.issn |
0018-9480 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TMTT.2003.817447 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27475 | |
dc.identifier.wosnumber |
WOS:000185719900009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
chip-type component | en_US |
dc.subject |
filter | en_US |
dc.subject |
low-temperature co-fired ceramic (LTCC) | en_US |
dc.subject |
multilayer ceramic (MLC) | en_US |
dc.title |
Realization of transmission zeros in combline filters using an auxiliary inductively coupled ground plane | en_US |
dc.type |
Article | en_US |
檔案
- 000185719900009.pdf (552.8 KB, Adobe PDF)
所屬典藏: 期刊論文