完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChen, Men_US
dc.contributor.authorChen, CMen_US
dc.contributor.authorKoo, HSen_US
dc.contributor.authorChen, CFen_US
dc.date.accessioned2014-12-08T15:40:17Z-
dc.date.available2014-12-08T15:40:17Z-
dc.date.issued2003-10-01en_US
dc.identifier.issn0925-9635en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.diamond.2003.08.024en_US
dc.identifier.urihttp://hdl.handle.net/11536/27505-
dc.description.abstractCatalyst growth carbon nanotubes (CNTs) have been synthesized successfully by microwave plasma chemical vapor deposition using CH4-CO2 gas sources, and Fe, Ti, Fe/Ti as catalysts. Significant difference of morphology in the carbon deposition was observed between Fe and Ti catalyst. By adjusting growth parameters of CH4 to CO2, a high yield of vertically aligned CNTs can be found in an Fe-deposited substrate. Ti is shown to be not suitable as a catalyst in CNT production. In the present work, we investigated the effect of H-2 plasma pretreatment on the CNT growth from the viewpoint of catalyst morphology, using Fe as the catalyst. After the H-2 pretreatment, significant catalyst particle sintering was observed and resulted in a broad size distribution of catalyst particles. The diameter of CNTs was governed by the catalyst particle size. The diameter of CNTs thus increased as the H-2 plasma pretreated time increased. The CNT diameters were distributed in the range approximately 10-20 nm when Fe-deposited substrate was not pretreated. However, the diameter of CNTs increased from 30 to 300 nm when Fe-deposited substrate was pretreated from 1 to 15 min. The CNT growth model in catalysts, as a function of a gas environment of CH4-CO2 gas mixture, was investigated. (C) 2003 Elsevier Science B.V. All rights reserved.en_US
dc.language.isoen_USen_US
dc.subjectcarbonen_US
dc.subjectcatalytic processen_US
dc.subjectplasmaen_US
dc.subjectCVDen_US
dc.titleCatalyzed growth model of carbon nanotubes by microwave plasma chemical vapor deposition using CH4 and CO2 gas mixturesen_US
dc.typeArticle; Proceedings Paperen_US
dc.identifier.doi10.1016/j.diamond.2003.08.024en_US
dc.identifier.journalDIAMOND AND RELATED MATERIALSen_US
dc.citation.volume12en_US
dc.citation.issue10-11en_US
dc.citation.spage1829en_US
dc.citation.epage1835en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000187427300038-
顯示於類別:會議論文


文件中的檔案:

  1. 000187427300038.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。