Latchup-free ESD protection design with complementary substrate-triggered SCR devices
Simple item page Statistics| Field | Value | Language |
|---|---|---|
dc.citation.epage |
1392 | en_US |
dc.citation.issue |
8 | en_US |
dc.citation.spage |
1380 | en_US |
dc.citation.volume |
38 | en_US |
dc.citation.woscount |
24 | |
dc.contributor.author |
Ker, MD | en_US |
dc.contributor.author |
Hsu, KC | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:40:31Z | |
dc.date.available |
2014-12-08T15:40:31Z | |
dc.date.issued |
2003-08-01 | en_US |
dc.description.abstract |
The turn-on mechanism of silicon-controlled rectifier (SCR) devices is essentially a current triggering event. While a current is applied to the base or substrate of an SCR device, it can be quickly triggered on into its latching state. In this paper, latchup-free electrostatic discharge (ESD) protection circuits which are combined with the substrate-triggered technique and an SCR device, are proposed. A complementary circuit style with the substrate-triggered SCR device is designed to discharge both the pad-to-V-SS and pad-to-V-DD ESD stresses. The novel complementary substrate-triggered SCR devices have the advantages of controllable switching voltage, adjustable holding voltage, faster turn-on speed, and compatible to general CMOS process without extra process modification such as the silicide-blocking mask and ESD implantation. The total holding voltage of the substrate-triggered SCR device can be linearly increased by adding the stacked diode string to avoid the transient-induced latchup issue in the ESD protection circuits. The on-chip ESD protection circuits designed with the proposed complementary substrate-triggered SCR devices and stacked diode string for the input/output pad and power pad have been successfully verified in a 0.25-mum salicided CMOS process with the human body model (machine model) ESD level of similar to7.25 kV (500 V) in a small layout area. | en_US |
dc.identifier.doi |
10.1109/JSSC.2003.814434 | en_US |
dc.identifier.issn |
0018-9200 | en_US |
dc.identifier.journal |
IEEE JOURNAL OF SOLID-STATE CIRCUITS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/JSSC.2003.814434 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27662 | |
dc.identifier.wosnumber |
WOS:000184371400009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
complementary | en_US |
dc.subject |
electrostatic discharge (ESD) | en_US |
dc.subject |
ESD protection circuit | en_US |
dc.subject |
silicon-controlled rectifier (SCR) | en_US |
dc.subject |
substrate-triggered technique | en_US |
dc.title |
Latchup-free ESD protection design with complementary substrate-triggered SCR devices | en_US |
dc.type |
Article | en_US |
Files
- 000184371400009.pdf (1.37 MB, Adobe PDF)
Collections: Articles
Cite this item
Ker, M., & Hsu, K. (2003). Latchup-free ESD protection design with complementary substrate-triggered SCR devices. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 38(8), 1380–1392. https://doi.org/10.1109/JSSC.2003.814434
Citation generated in APA 7th edition style; please check it before use.
Share
Permanent link: https://ir.lib.nycu.edu.tw/handle/11536/27662