Minimum copper loss flux-weakening control of surface mounted permanent magnet synchronous motors
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
936 | en_US |
dc.citation.issue |
4 | en_US |
dc.citation.spage |
929 | en_US |
dc.citation.volume |
18 | en_US |
dc.citation.woscount |
12 | |
dc.contributor.author |
Chen, JJ | en_US |
dc.contributor.author |
Chin, KP | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:40:41Z | |
dc.date.available |
2014-12-08T15:40:41Z | |
dc.date.issued |
2003-07-01 | en_US |
dc.description.abstract |
This study presents a novel current loop design method capable of automatic flux-weakening control with minimum copper loss for surface mounted permanent magnet synchronous motors (SPMSM). The proposed current controller can automatically re-compute the d-axis current command to defer output voltage saturation. Consequently, the motor operations in the flux-weakening region are also contained in the stable operating region. Analysis results indicate that since the output voltage vector in the flux-weakening region produced by this controller is consistently on the boundary of the maximum output voltage vector allowed by the inverter, the corresponding flux-weakening current is the optimal value in the sense of minimum copper loss. This minimum copper loss design differs from the maximum output torque design and the constant power design of the flux-weakening control methods found in the literature. Experimental results further demonstrate the feasibility of the proposed current controller and its ability to maximize the speed range of the motor drive for a given inverter capacity. | en_US |
dc.identifier.doi |
10.1109/TPEL.2003.813751 | en_US |
dc.identifier.issn |
0885-8993 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON POWER ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TPEL.2003.813751 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27751 | |
dc.identifier.wosnumber |
WOS:000184375300001 | |
dc.language.iso |
en_US | en_US |
dc.subject |
current control | en_US |
dc.subject |
flux-weakening control | en_US |
dc.subject |
PMSM | en_US |
dc.subject |
torque | en_US |
dc.title |
Minimum copper loss flux-weakening control of surface mounted permanent magnet synchronous motors | en_US |
dc.type |
Article | en_US |
檔案
- 000184375300001.pdf (596.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chen, J., & Chin, K. (2003). Minimum copper loss flux-weakening control of surface mounted permanent magnet synchronous motors. IEEE TRANSACTIONS ON POWER ELECTRONICS, 18(4), 929–936. https://doi.org/10.1109/TPEL.2003.813751
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27751