Structure-based specification-constrained test frequency generation for linear analog circuits
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
651 | en_US |
dc.citation.issue |
4 | en_US |
dc.citation.spage |
637 | en_US |
dc.citation.volume |
19 | en_US |
dc.citation.woscount |
1 | |
dc.contributor.author |
Chang, SJ | en_US |
dc.contributor.author |
Lee, CL | en_US |
dc.contributor.author |
Chen, JE | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:40:43Z | |
dc.date.available |
2014-12-08T15:40:43Z | |
dc.date.issued |
2003-07-01 | en_US |
dc.description.abstract |
In this paper, an approach to generating the sinusoidal stimulus of the right frequency of a linear analog circuit for testing circuit parameter faults under the constraints of the specifications of the circuit under test (CUT) is presented. This approach considers tolerance bounds due to fabrication process fluctuations of tested parameters using a statistical model and maps them to an accepted region of the observed signature of the CUT. The generated test stimulus is derived based on a proposed testing confidence level. Test generation procedures for both the monotonic and non-monotonic relationships between the signature and the parameter are proposed and demonstrated. The procedures are applied to a continuous time state-variable filter example circuit to show the effectiveness of the methodology. | en_US |
dc.identifier.issn |
1016-2364 | en_US |
dc.identifier.journal |
JOURNAL OF INFORMATION SCIENCE AND ENGINEERING | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27777 | |
dc.identifier.wosnumber |
WOS:000184321600006 | |
dc.language.iso |
en_US | en_US |
dc.subject |
test pattern generation | en_US |
dc.subject |
analog IC test | en_US |
dc.subject |
structural test | en_US |
dc.subject |
specification test | en_US |
dc.subject |
Monte-Carlo analysis | en_US |
dc.title |
Structure-based specification-constrained test frequency generation for linear analog circuits | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Chang, S., Lee, C., & Chen, J. (2003). Structure-based specification-constrained test frequency generation for linear analog circuits. JOURNAL OF INFORMATION SCIENCE AND ENGINEERING, 19(4), 637–651. https://ir.lib.nycu.edu.tw/handle/11536/27777
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27777