Sensorless scalar-controlled induction motor drives with modified flux observer
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
186 | en_US |
dc.citation.issue |
2 | en_US |
dc.citation.spage |
181 | en_US |
dc.citation.volume |
18 | en_US |
dc.citation.woscount |
5 | |
dc.contributor.author |
Wang, CC | en_US |
dc.contributor.author |
Fang, CH | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:40:49Z | |
dc.date.available |
2014-12-08T15:40:49Z | |
dc.date.issued |
2003-06-01 | en_US |
dc.description.abstract |
This paper presents a simple sensorless scalar control algorithm to control the speed of an induction motor. First, a modified flux observer was employed to estimate the stator flux with the voltage command and the feedback current. Then, based on the mathematical model of the induction motor, the slip frequency was calculated, and the frequency of the voltage command was compensated. An auto-boost controller was designed to overcome the decrease in voltages of the stator resistance and to maintain constant stator flux amplitude. To improve the pure integration problem, a highpass filter was installed in the stator flux observer. In this filter, the cut-off frequency is proportional to the voltage frequency; therefore, the phase shift and amplitude degradation of the estimated flux can be corrected easily. Finally, to demonstrate the proposed control algorithm, a PC-based experimental system was constructed in a 1-hp induction motor. Experimental results are presented to validate the effectiveness of our design. | en_US |
dc.identifier.doi |
10.1109/TEC.2002.805181 | en_US |
dc.identifier.issn |
0885-8969 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ENERGY CONVERSION | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TEC.2002.805181 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27832 | |
dc.identifier.wosnumber |
WOS:000183137900001 | |
dc.language.iso |
en_US | en_US |
dc.subject |
flux observer | en_US |
dc.subject |
induction motor | en_US |
dc.subject |
scalar control | en_US |
dc.subject |
sensorless control | en_US |
dc.subject |
slip estimator | en_US |
dc.title |
Sensorless scalar-controlled induction motor drives with modified flux observer | en_US |
dc.type |
Article | en_US |
檔案
- 000183137900001.pdf (552.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Wang, C., & Fang, C. (2003). Sensorless scalar-controlled induction motor drives with modified flux observer. IEEE TRANSACTIONS ON ENERGY CONVERSION, 18(2), 181–186. https://doi.org/10.1109/TEC.2002.805181
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27832