High-density MIM canpacitors using AlTaOx dielectrics
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
308 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
306 | en_US |
dc.citation.volume |
24 | en_US |
dc.citation.woscount |
15 | |
dc.contributor.author |
Yang, MY | en_US |
dc.contributor.author |
Huang, CH | en_US |
dc.contributor.author |
Chin, A | en_US |
dc.contributor.author |
Zhu, CX | en_US |
dc.contributor.author |
Li, MF | en_US |
dc.contributor.author |
Kwong, DL | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:40:57Z | |
dc.date.available |
2014-12-08T15:40:57Z | |
dc.date.issued |
2003-05-01 | en_US |
dc.description.abstract |
The authors have obtained good MIM capacitor integrity of high-capacitance density of 10 fF/mum(2) using high-k AlTaOx fabricated at 400degreesC. In addition, small voltage dependence of capacitance of < 600, ppm (quadratic voltage coefficient of only 130 ppm/V-2). is obtained at 1 GHz using their mathematical derivation from measured high-frequency S parameters. These good results ensure the high-k AlTaOx. MIM capacitor technology is useful for high-precision circuits operated at the RF frequency regime. | en_US |
dc.identifier.doi |
10.1109/LED.2003.812572 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LED.2003.812572 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/27913 | |
dc.identifier.wosnumber |
WOS:000184064600007 | |
dc.language.iso |
en_US | en_US |
dc.subject |
capacitor | en_US |
dc.subject |
dielectric constant | en_US |
dc.subject |
frequency drpendence | en_US |
dc.subject |
high kappa | en_US |
dc.subject |
MIM | en_US |
dc.subject |
RF | en_US |
dc.title |
High-density MIM canpacitors using AlTaOx dielectrics | en_US |
dc.type |
Article | en_US |
檔案
- 000184064600007.pdf (285.5 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Yang, M., Huang, C., Chin, A., Zhu, C., Li, M., & Kwong, D. (2003). High-density MIM canpacitors using AlTaOx dielectrics. IEEE ELECTRON DEVICE LETTERS, 24(5), 306–308. https://doi.org/10.1109/LED.2003.812572
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/27913