Active devices under CMOS I/O pads
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2287 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
2279 | en_US |
dc.citation.volume |
49 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Chou, KY | en_US |
dc.contributor.author |
Chen, MJ | en_US |
dc.contributor.author |
Liu, CW | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:41:43Z | |
dc.date.available |
2014-12-08T15:41:43Z | |
dc.date.issued |
2002-12-01 | en_US |
dc.description.abstract |
Active devices, including electrostatic discharge protection devices and ring-oscillator circuits, under CMOS I/O pads are investigated in a 130 nm full eight-level copper metal complementary metal-oxide-semiconductoir process, using fluorinated silicate glass (FSG) low-k inter-metal dielectric. The high current I-V curve measured in the second breakdown trigger point (V-t2, I-t2) of ESD protection devices under various metal level stack structures, shows that i) I-t2 depends very weakly on the number of metal levels used, as expected given specific junction power dissipation criteria; and ii) V-t2 increases with the number of metal level stacks of I/O pads because of increased dynamic impedance due to the presence of more metal levels, as clarified by a simple RC model. Moreover, no noticeable degradation in the speed of the ring-oscillator circuit, as measured for a variety of test structures subjected to bonding mechanical stress, thermal stress by temperature cycling and dc electrical stress by transmission line pulse, as well as ac electrical stress by capacitive-coupling experiments. Accordingly, active devices under CMOS I/O pads is independent of bonding pad metal level structures. | en_US |
dc.identifier.doi |
10.1109/TED.2002.807452 | en_US |
dc.identifier.issn |
0018-9383 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ELECTRON DEVICES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TED.2002.807452 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/28365 | |
dc.identifier.wosnumber |
WOS:000180982000023 | |
dc.language.iso |
en_US | en_US |
dc.subject |
CMOS | en_US |
dc.subject |
copper | en_US |
dc.subject |
ESD | en_US |
dc.subject |
FSG | en_US |
dc.subject |
IMD | en_US |
dc.subject |
I/O bonding pad | en_US |
dc.subject |
low-k | en_US |
dc.subject |
propagation gate delay | en_US |
dc.subject |
ring-oscillator | en_US |
dc.subject |
second breakdown trigger point | en_US |
dc.subject |
SOC | en_US |
dc.subject |
transmission line pulse | en_US |
dc.title |
Active devices under CMOS I/O pads | en_US |
dc.type |
Article | en_US |
檔案
- 000180982000023.pdf (1.17 MB, Adobe PDF)
所屬典藏: 期刊論文