Post-implantation thermal annealing effect on the gate oxide of triple-well-structure
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2880 | en_US |
dc.citation.issue |
5A | en_US |
dc.citation.spage |
2878 | en_US |
dc.citation.volume |
41 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Hsu, WC | en_US |
dc.contributor.author |
Liang, MS | en_US |
dc.contributor.author |
Lin, CT | en_US |
dc.contributor.author |
Chen, MC | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:42:27Z | |
dc.date.available |
2014-12-08T15:42:27Z | |
dc.date.issued |
2002-05-01 | en_US |
dc.description.abstract |
In this work, we investigate the effect of post-implantation thermal annealing on the quality of thin gate oxides grown on MeV ion-implanted Si substrates for the triple-well structure. The thin gate oxide grown on the MeV ion-implanted Si substrates without post-implantation thermal annealing may contain pinholes, leading to oxide failure at a very low voltage; in addition, the gate oxide has a higher density of interface states, which may result in a low breakdown voltage. With appropriate post-implantation thermal annealing before the growth of the gate oxide, e.g., 1000degreesC for 30 min under the MeV implantation conditions employed in this work, the gate oxide is able to regain its integrity in terms of electrical breakdown voltage. | en_US |
dc.identifier.doi |
10.1143/JJAP.41.2878 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.41.2878 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/28832 | |
dc.identifier.wosnumber |
WOS:000176515700016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
triple well | en_US |
dc.subject |
high-energy ion implantation | en_US |
dc.subject |
thermal annealing | en_US |
dc.subject |
breakdown voltage | en_US |
dc.subject |
interface state density | en_US |
dc.title |
Post-implantation thermal annealing effect on the gate oxide of triple-well-structure | en_US |
dc.type |
Article | en_US |
檔案
- 000176515700016.pdf (735.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hsu, W., Liang, M., Lin, C., & Chen, M. (2002). Post-implantation thermal annealing effect on the gate oxide of triple-well-structure. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 41(5A), 2878–2880. https://doi.org/10.1143/JJAP.41.2878
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28832