Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1734 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
1721 | en_US |
dc.citation.volume |
41 | en_US |
dc.citation.woscount |
19 | |
dc.contributor.author |
Chen, MD | en_US |
dc.contributor.author |
Hsu, RQ | en_US |
dc.contributor.author |
Fuh, KH | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:43:27Z | |
dc.date.available |
2014-12-08T15:43:27Z | |
dc.date.issued |
2001-09-01 | en_US |
dc.description.abstract |
A series of shear spinning experiments has been performed to produce axi-symmetric cones from blank sheet. The experiments investigated influences of roller nose radius, mandrel revolution and roller feed on the spinning force and the inside/outside surface roughness of spun cone. Statistical analysis was adopted to construct the regression equations governing these parameters. Independent experiments verified the findings. It was discovered that the established regression equations possess a significant degree of reliability. (C) 2001 Elsevier Science Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/S0890-6955(01)00039-6 | en_US |
dc.identifier.issn |
0890-6955 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/S0890-6955(01)00039-6 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/29412 | |
dc.identifier.wosnumber |
WOS:000169780800003 | |
dc.language.iso |
en_US | en_US |
dc.subject |
shear spinning | en_US |
dc.subject |
shear force | en_US |
dc.subject |
response surface method | en_US |
dc.subject |
regression analysis | en_US |
dc.subject |
over-roll | en_US |
dc.title |
Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis | en_US |
dc.type |
Article | en_US |
檔案
- 000169780800003.pdf (441.9 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chen, M., Hsu, R., & Fuh, K. (2001). Forecast of shear spinning force and surface roughness of spun cones by employing regression analysis. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 41(12), 1721–1734. https://doi.org/10.1016/S0890-6955(01)00039-6
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29412