A hybrid specification method for the design of a workcell controller in manufacturing systems
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
938 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
928 | en_US |
dc.citation.volume |
17 | en_US |
dc.citation.woscount |
2 | |
dc.contributor.author |
Lai, HF | en_US |
dc.contributor.author |
Lee, CE | en_US |
dc.contributor.department |
工業工程與管理學系 | zh_TW |
dc.contributor.department |
Department of Industrial Engineering and Management | en_US |
dc.date.accessioned |
2014-12-08T15:44:21Z | |
dc.date.available |
2014-12-08T15:44:21Z | |
dc.date.issued |
2001 | en_US |
dc.description.abstract |
This paper presents a hybrid specification method (HSM) for the description and design of a workcell controller in a manufacturing system. This hybrid method integrates the top-down IDEF0 and bottom-up statechart approaches. The high-level functional abstraction of a target system is first decomposed using IDEF0. Statecharts of the overall system are then combined using compositional constructs. programmable logic controller (PLCs) programs that represent the low-level abstraction are finally transformed from the statecharts. To demonstrate the viability of this method, an example of a workcell controller is designed using this method. The proposed method provides an alternative to the traditional top-down decomposition technique with reusable and extendable properties. | en_US |
dc.identifier.doi |
10.1007/s001700170103 | en_US |
dc.identifier.issn |
0268-3768 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s001700170103 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/29967 | |
dc.identifier.wosnumber |
WOS:000169770700007 | |
dc.language.iso |
en_US | en_US |
dc.subject |
behavioral specification | en_US |
dc.subject |
functional specification | en_US |
dc.subject |
HSM approach | en_US |
dc.subject |
IDEFO | en_US |
dc.subject |
statecharts | en_US |
dc.subject |
workcell controller | en_US |
dc.title |
A hybrid specification method for the design of a workcell controller in manufacturing systems | en_US |
dc.type |
Article | en_US |
檔案
- 000169770700007.pdf (162.9 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lai, H., & Lee, C. (2001). A hybrid specification method for the design of a workcell controller in manufacturing systems. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 17(12), 928–938. https://doi.org/10.1007/s001700170103
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29967