The epoxy-polycarbonate blends cured with aliphatic amine .2. Thermal and mechanical properties mechanisms
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2191 | en_US |
dc.citation.issue |
13 | en_US |
dc.citation.spage |
2183 | en_US |
dc.citation.volume |
35 | en_US |
dc.contributor.author |
Lin, ML | en_US |
dc.contributor.author |
Chang, KH | en_US |
dc.contributor.author |
Chang, FC | en_US |
dc.contributor.author |
Li, MS | en_US |
dc.contributor.author |
Ma, CCM | en_US |
dc.contributor.department |
應用化學系 | zh_TW |
dc.contributor.department |
Department of Applied Chemistry | en_US |
dc.date.accessioned |
2014-12-08T15:01:27Z | |
dc.date.available |
2014-12-08T15:01:27Z | |
dc.date.issued |
1997-09-30 | en_US |
dc.description.abstract |
The transamidation reaction converts the carbonate and amine into N-aliphatic aromatic carbamate and urea, causing the equivalent of oxirane and amine nonstoichiometric in the primary cure stage. After postcure, the substitution reaction takes place and results in a more tightly crosslinked structure. Such a higher crosslinking density is responsible for higher T-g, tensile strength, and tensile modulus in the postcure stage than that in the primary and secondary cure stages. This trend is more pronounced in those PC-epoxy blends containing higher molecular weight aliphatic amine or a higher content of PC. This phenomenon is due to the difference in the fraction of amino group of aliphatic amine consumed in the transamidation. PC-epoxy/aliphatic amine blends show minor improvement in the high strain rate Izod impact tests, while toughness improvement for some blends is substantial at low strain rate tensile tests. (C) 1997 John Wiley & Sons, Inc. | en_US |
dc.identifier.issn |
0887-6266 | en_US |
dc.identifier.journal |
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/300 | |
dc.language.iso |
en_US | en_US |
dc.subject |
epoxy | en_US |
dc.subject |
blend | en_US |
dc.subject |
polycarbonate | en_US |
dc.subject |
transesterification | en_US |
dc.subject |
transamidation carbamate | en_US |
dc.subject |
urea | en_US |
dc.title |
The epoxy-polycarbonate blends cured with aliphatic amine .2. Thermal and mechanical properties mechanisms | en_US |
dc.type |
Article | en_US |
檔案
- A1997XT79700018.pdf (178.5 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, M., Chang, K., Chang, F., Li, M., & Ma, C. (1997). The epoxy-polycarbonate blends cured with aliphatic amine .2. Thermal and mechanical properties mechanisms. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 35(13), 2183–2191. https://ir.lib.nycu.edu.tw/handle/11536/300
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/300