A new process technique for complementary metal-oxide-semiconductor [CMOS] compatible sensors
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
66 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
57 | en_US |
dc.citation.volume |
13 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Sheen, CS | en_US |
dc.contributor.author |
Chi, S | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2014-12-08T15:44:30Z | |
dc.date.available |
2014-12-08T15:44:30Z | |
dc.date.issued |
2001 | en_US |
dc.description.abstract |
A new sacrificial-etching-window (SEW) structure is reported for the first time, which can be used for most complementary metal-oxide-semiconductor (CMOS) compatible sensor structures. Using a buried sacrificial layer, the etching windows of the substrate can be extended beneath the membrane. The SEW technique combines the advantages of both surface micromachining by using a sacrificial layer structure and bulk micromachining by anisotropic etching of a silicon substrate. Using the SEW structure, one can speed up the etching rate and design a larger membrane with a larger active area. Several sensors are fabricated by 1.2 mum industrial CMOS IC technologies combined with subsequent anisotropic front-side etching stops. Three kinds of SEW thermoelectric sensors are reported in this paper, and the characteristics of the sensors are analyzed and measured. | en_US |
dc.identifier.issn |
0914-4935 | en_US |
dc.identifier.journal |
SENSORS AND MATERIALS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/30043 | |
dc.identifier.wosnumber |
WOS:000169956200005 | |
dc.language.iso |
en_US | en_US |
dc.subject |
sacrificial | en_US |
dc.subject |
CMOS | en_US |
dc.subject |
thermoelectric | en_US |
dc.subject |
sensor | en_US |
dc.title |
A new process technique for complementary metal-oxide-semiconductor [CMOS] compatible sensors | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Sheen, C., & Chi, S. (2001). A new process technique for complementary metal-oxide-semiconductor [CMOS] compatible sensors. SENSORS AND MATERIALS, 13(1), 57–66. https://ir.lib.nycu.edu.tw/handle/11536/30043
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/30043