Influence of sheet resistance on N2O-grown polyoxide
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1607 | en_US |
dc.citation.issue |
4A | en_US |
dc.citation.spage |
1604 | en_US |
dc.citation.volume |
39 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Chang, KM | en_US |
dc.contributor.author |
Lee, TC | en_US |
dc.contributor.author |
Liu, SH | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:45:31Z | |
dc.date.available |
2014-12-08T15:45:31Z | |
dc.date.issued |
2000-04-01 | en_US |
dc.description.abstract |
The influence of sheet resistance on polyoxide was explored in this paper. Polyoxides were grown on polysilicon with different sheet resistances (30-150 Omega/cm(2)). It was found that as the sheet resistance increased from 30 Omega/cm(2) to 50 Omega/cm(2) the characteristics of polyoxide was improved with higher breakdown electric field and higher charge-to-breakdown. However, as the sheet resistance continued to increase (> 110 Omega/cm(2)), the characteristics of polyoxide became worse again. This phenomenon is explained by phosphorus concentration incorporated into polyoxide. Phosphorus concentration helps to form a smoother polyoxide/polysilicon interface. Thus, the characteristics of polyoxide with high sheet resistance (>110 Omega/cm(2)) was worse than that of polyoxide with low sheet resistance due to a rough polyoxide interface. However, too much. phosphorus incorporated into polyoxide degrades the quality of polyoxide. So the characteristics of polyoxide with low sheet resistance (<50 Omega/cm(2)) became worse again. Consequently, high quality of polyoxide should he grown on the polysilicon with middle sheet resistance (50-110 Omega/cm(2)). | en_US |
dc.identifier.doi |
10.1143/JJAP.39.1604 | en_US |
dc.identifier.issn |
0021-4922 | en_US |
dc.identifier.journal |
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1143/JJAP.39.1604 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/30630 | |
dc.identifier.wosnumber |
WOS:000088909200003 | |
dc.language.iso |
en_US | en_US |
dc.subject |
sheet resistance | en_US |
dc.subject |
polyoxide | en_US |
dc.subject |
phosphorus | en_US |
dc.subject |
polysilicon | en_US |
dc.subject |
charge-to-breakdown | en_US |
dc.title |
Influence of sheet resistance on N2O-grown polyoxide | en_US |
dc.type |
Article | en_US |
檔案
- 000088909200003.pdf (735.4 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chang, K., Lee, T., & Liu, S. (2000). Influence of sheet resistance on N2O-grown polyoxide. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 39(4A), 1604–1607. https://doi.org/10.1143/JJAP.39.1604
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/30630