A new technique for hot carrier reliability evaluations of flash memory cell after long-term program/erase cycles
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1889 | en_US |
dc.citation.issue |
9 | en_US |
dc.citation.spage |
1883 | en_US |
dc.citation.volume |
46 | en_US |
dc.citation.woscount |
4 | |
dc.contributor.author |
Chung, SS | en_US |
dc.contributor.author |
Yih, CM | en_US |
dc.contributor.author |
Cheng, SM | en_US |
dc.contributor.author |
Liang, MS | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:46:14Z | |
dc.date.available |
2014-12-08T15:46:14Z | |
dc.date.issued |
1999-09-01 | en_US |
dc.description.abstract |
In this paper, we provide a methodology to evaluate the hot-carrier-induced reliability of hash memory cells after long-term program/erase cycles. First, the gated-diode measurement technique has been employed for determining the lateral distributions of interface state (N-it) and oxide trap charges (Q(ox)) under both channel-hot-electron (CHE) programming bias and source-side erase-bias stress conditions. A gate current model was then developed by including both the effects of N-it and Q(ox), Degradation of flash memory cell after P/E cycles due to the above oxide damage was studied by monitoring the gate current. For the cells during programming, the oxide damage near the drain will result in a programming time delay, and we found that the interface state generation iis the dominant mechanism. Furthermore, for the cells after long-term erase using source-side FN erase, the oxide trap charge will dominate the cell performance such as read-disturb. In order to reduce the read-disturb, source bias should be kept as low as possible since the larger the applied source erasing bias, the worse the device reliability becomes. | en_US |
dc.identifier.doi |
10.1109/16.784189 | en_US |
dc.identifier.issn |
0018-9383 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ELECTRON DEVICES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/16.784189 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/31103 | |
dc.identifier.wosnumber |
WOS:000082242500011 | |
dc.language.iso |
en_US | en_US |
dc.subject |
flash memory | en_US |
dc.subject |
hot carrier reliability | en_US |
dc.title |
A new technique for hot carrier reliability evaluations of flash memory cell after long-term program/erase cycles | en_US |
dc.type |
Article | en_US |
檔案
- 000082242500011.pdf (226.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chung, S., Yih, C., Cheng, S., & Liang, M. (1999). A new technique for hot carrier reliability evaluations of flash memory cell after long-term program/erase cycles. IEEE TRANSACTIONS ON ELECTRON DEVICES, 46(9), 1883–1889. https://doi.org/10.1109/16.784189
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/31103