Preparation and characteristics of Bi-Pb-Sr-Ca-Cu-O superconducting films by spray pyrolysis and post-annealing
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
235 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
226 | en_US |
dc.citation.volume |
56 | en_US |
dc.citation.woscount |
1 | |
dc.contributor.author |
Koo, HS | en_US |
dc.contributor.author |
Tseng, TY | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:47:27Z | |
dc.date.available |
2014-12-08T15:47:27Z | |
dc.date.issued |
1998-10-15 | en_US |
dc.description.abstract |
Two kinds of high-T-c superconducting films, Bi1.8Pb0.2Sr2Ca2Cu3Oy and Bi2PbSr2Ca2Cu3Oy, were prepared by spray pyrolysis and postannealing with the aid of Bi-based bulk. Highly c-oriented and nearly single-phase 2223 high-T-c Bi-based superconducting films can be achieved for the as-sprayed Bi1.8Pb0.2Sr2Ca2Cu3Oy and the Bi2PbSr2Ca2Cu3Oy films annealed at 845 degrees C for 20 h. X-ray diffraction (XRD) patterns exhibit amorphous-like phases with microcrystals for the as-sprayed films and the transformation of amorphous-like phase into crystalline high-T-c (2223), low-T-c (2212) and Ca2PbO4 phases for the resultant films. For as-sprayed films, post-annealing in the closed system with Bi-based bulk sources is favourable to the formation of 2223 phase; on the contrary, the 2212 phase is formed in the open system, as demonstrated by XRD and scanning electron microscopy (SEM). SEM and XRD analyses show a plate-like microstructure for the 2223 phase and a needle-like one for the 2212 phase. This phenomenon explains that compensation and diffusion of Bi-based bulk sources into the as-sprayed films help in the formation of 2223 phase and these processes are more efficient in the closed system. The resultant film shows a high critical transition temperature (T-c,T-zero) of 104 K and a critical current density (J(c)) of 1.8 x 10(4) A/cm(2). (C) 1998 Elsevier Science S.A. All rights reserved. | en_US |
dc.identifier.issn |
0254-0584 | en_US |
dc.identifier.journal |
MATERIALS CHEMISTRY AND PHYSICS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/31812 | |
dc.identifier.wosnumber |
WOS:000076579800005 | |
dc.language.iso |
en_US | en_US |
dc.subject |
spray pyrolysis | en_US |
dc.subject |
Bi-based superconductors | en_US |
dc.subject |
superconducting films | en_US |
dc.subject |
amorphous | en_US |
dc.subject |
transformation | en_US |
dc.subject |
plate-like microstructure | en_US |
dc.subject |
needle-like microstructure | en_US |
dc.title |
Preparation and characteristics of Bi-Pb-Sr-Ca-Cu-O superconducting films by spray pyrolysis and post-annealing | en_US |
dc.type |
Article | en_US |
檔案
- 000076579800005.pdf (1.10 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Koo, H., & Tseng, T. (1998). Preparation and characteristics of Bi-Pb-Sr-Ca-Cu-O superconducting films by spray pyrolysis and post-annealing. MATERIALS CHEMISTRY AND PHYSICS, 56(3), 226–235. https://ir.lib.nycu.edu.tw/handle/11536/31812
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/31812