Scan-Cell Reordering for Minimizing Scan-Shift Power Based on Nonspecified Test Cubes
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
en_US | |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
en_US | |
dc.citation.volume |
16 | en_US |
dc.contributor.author |
Wu, Yu-Ze | en_US |
dc.contributor.author |
Chao, Mango C. -T. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:48:03Z | |
dc.date.available |
2014-12-08T15:48:03Z | |
dc.date.issued |
2010-11-01 | en_US |
dc.description.abstract |
This article presents several scan-cell reordering techniques to reduce the signal transitions during the test mode while preserving the don't-care bits in the test patterns for a later optimization. Combined with a pattern-filling technique, the proposed scan-cell reordering techniques can utilize both high response correlations and pattern correlations to simultaneously minimize scan-out and scan-in transitions. Those scan-shift transitions can be further reduced by selectively using the inverse connections between scan cells. In addition, the trade-off between routing overhead and power consumption can also be controlled by the proposed scan-cell reordering techniques. A series of experiments are conducted to demonstrate the effectiveness of each of the proposed techniques individually. | en_US |
dc.identifier.doi |
10.1145/1870109.1870119 | en_US |
dc.identifier.issn |
1084-4309 | en_US |
dc.identifier.journal |
ACM TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1145/1870109.1870119 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/32040 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Algorithms | en_US |
dc.subject |
Design | en_US |
dc.subject |
Scan testing | en_US |
dc.subject |
DFT | en_US |
dc.subject |
low-power testing | en_US |
dc.title |
Scan-Cell Reordering for Minimizing Scan-Shift Power Based on Nonspecified Test Cubes | en_US |
dc.type |
Article | en_US |
檔案
- 000284931600010.pdf (904.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Wu, Y.-Z., & Chao, M. C. T. (2010). Scan-Cell Reordering for Minimizing Scan-Shift Power Based on Nonspecified Test Cubes. ACM TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS, 16(1). https://doi.org/10.1145/1870109.1870119
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/32040