Parallel-RC Feedback Low-Noise Amplifier for UWB Applications
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
586 | en_US |
dc.citation.issue |
8 | en_US |
dc.citation.spage |
582 | en_US |
dc.citation.volume |
57 | en_US |
dc.citation.woscount |
6 | |
dc.contributor.author |
He, Kuang-Chi | en_US |
dc.contributor.author |
Li, Ming-Tsung | en_US |
dc.contributor.author |
Li, Chen-Ming | en_US |
dc.contributor.author |
Tarng, Jenn-Hwan | en_US |
dc.contributor.department |
電信工程研究所 | zh_TW |
dc.contributor.department |
Institute of Communications Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:48:37Z | |
dc.date.available |
2014-12-08T15:48:37Z | |
dc.date.issued |
2010-08-01 | en_US |
dc.description.abstract |
A two-stage 3.1- to 10.6-GHz ultrawideband CMOS low-noise amplifier (LNA) is presented. In our design, a parallel resistance-capacitance shunt feedback with a source inductance is proposed to obtain broadband input matching and to reduce the noise level effectively; furthermore, a parallel inductance-capacitance network at drain is drawn to further suppress the noise, and a very low noise level is achieved. The proposed LNA is implemented by the Taiwan Semiconductor Manufacturing Company 0.18-mu m CMOS technology. Measured results show that the noise figure is 2.5-4.7 dB from 3.1 to 10.6 GHz, which may be the best result among previous reports in the 0.18-mu m CMOS 3.1- to 10.6-GHz ultrawideband LNA. The power gain is 10.9-13.9 dB from 3.1 to 10.6 GHz. The input return loss is below -9.4 dB from 3.1 to 15 GHz. It consumes 14.4 mW from a 1.4-V supply voltage and occupies an area of only 0.46 mm(2). | en_US |
dc.identifier.doi |
10.1109/TCSII.2010.2050943 | en_US |
dc.identifier.issn |
1549-7747 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCSII.2010.2050943 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/32334 | |
dc.identifier.wosnumber |
WOS:000283130200002 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Broadband | en_US |
dc.subject |
complimentary metal-oxide-semiconductor (CMOS) low-noise amplifier (LNA) | en_US |
dc.subject |
feedback | en_US |
dc.subject |
ultrawideband (UWB) | en_US |
dc.title |
Parallel-RC Feedback Low-Noise Amplifier for UWB Applications | en_US |
dc.type |
Article | en_US |
檔案
- 000283130200002.pdf (223.3 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
He, K.-C., Li, M.-T., Li, C.-M., & Tarng, J.-H. (2010). Parallel-RC Feedback Low-Noise Amplifier for UWB Applications. IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 57(8), 582–586. https://doi.org/10.1109/TCSII.2010.2050943
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/32334