A two-phase fault simulation scheme for sequential circuits
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
686 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
669 | en_US |
dc.citation.volume |
14 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Wu, WC | en_US |
dc.contributor.author |
Lee, CL | en_US |
dc.contributor.author |
Chen, JE | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:48:45Z | |
dc.date.available |
2014-12-08T15:48:45Z | |
dc.date.issued |
1998-09-01 | en_US |
dc.description.abstract |
A two-phase fault simulation scheme for sequential circuits is proposed. In this fault simulation, the input sequence is divided into two parts. In the first phase, fault free simulation is performed with the first sequence of patterns. In the second phase, fault simulation is performed with the rest of the patterns. Five cases of faults which result from two-phase fault simulation are discussed in detail. Significant speedup in simulation time can be obtained because this fault simulation approach can quickly drop Case 1 faults, which are time-consuming faults and would be considered undetectable in the traditional three-value fault simulation but are actually detected in exact fault simulation. Almost "exact" results can be obtained for detected faults except for a small percentage of over-detected-faults (ODFs) and under-detected-faults (UDFs). | en_US |
dc.identifier.issn |
1016-2364 | en_US |
dc.identifier.journal |
JOURNAL OF INFORMATION SCIENCE AND ENGINEERING | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/32421 | |
dc.identifier.wosnumber |
WOS:000075744900009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
computer-aided-design | en_US |
dc.subject |
digital testing | en_US |
dc.subject |
sequential circuits | en_US |
dc.subject |
fault simulation | en_US |
dc.subject |
untestable faults | en_US |
dc.title |
A two-phase fault simulation scheme for sequential circuits | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Wu, W., Lee, C., & Chen, J. (1998). A two-phase fault simulation scheme for sequential circuits. JOURNAL OF INFORMATION SCIENCE AND ENGINEERING, 14(3), 669–686. https://ir.lib.nycu.edu.tw/handle/11536/32421
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/32421