Fabrication of CNTs with controlled diameters and their applications as electrocatalyst supports for DMFC
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
350 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
343 | en_US |
dc.citation.volume |
20 | en_US |
dc.contributor.author |
Lo, An-Ya | en_US |
dc.contributor.author |
Yu, Ningya | en_US |
dc.contributor.author |
Huang, Shing-Jong | en_US |
dc.contributor.author |
Hung, Chin-Te | en_US |
dc.contributor.author |
Liu, Shou-Heng | en_US |
dc.contributor.author |
Lei, Zhibin | en_US |
dc.contributor.author |
Kuo, Cheng-Tzu | en_US |
dc.contributor.author |
Liu, Shang-Bin | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:01:31Z | |
dc.date.available |
2014-12-08T15:01:31Z | |
dc.date.issued |
2011-03-01 | en_US |
dc.description.abstract |
A facile synthesis procedure based on chemical vapor deposition (CVD) process has been developed to fabricate carbon nanotubes (CNTs) with controlled diameters and high yields utilizing Fe-containing ordered hexagonal mesoporous silicas (HMSs) such as MCM-41 and SBA-15 having varied pore sizes as the catalysts as well as the templates. It is found that unlike Fe/HMS catalysts prepared by co-precipitation method, samples prepared by the impregnation method gave rise to multi-wall CNTs with uniform diameters, which were largely dictated by the pore size of the Fe/HMS catalysts. Among these uniform MWCNTs, sample with a larger diameter (>= 8 nm) was found to be more favorable as support for Pt catalyst, leading to a homogeneous dispersion of metal nanoparticles. Consequently, the Pt/CNT electrocatalysts so prepared gave rise to superior methanol oxidation activities as well as tolerances for CO poisoning compared to Pt supported on commercial single-wall CNT (Pt/SWCNT) and XC-72 activated carbon (Pt/XC-72) having a similar metal loading. (c) 2011 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.diamond.2011.01.002 | en_US |
dc.identifier.issn |
0925-9635 | en_US |
dc.identifier.journal |
DIAMOND AND RELATED MATERIALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.diamond.2011.01.002 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/352 | |
dc.identifier.wosnumber |
WOS:000289539900015 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Carbon nanotube | en_US |
dc.subject |
Templating synthesis | en_US |
dc.subject |
Chemical vapor deposition | en_US |
dc.subject |
Hexagonal mesoporous silica | en_US |
dc.subject |
Electrocatalyst | en_US |
dc.subject |
Direct methanol fuel cell | en_US |
dc.title |
Fabrication of CNTs with controlled diameters and their applications as electrocatalyst supports for DMFC | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
- 000289539900015.pdf (1.48 MB, Adobe PDF)
所屬典藏: 會議論文
引用此條目
Lo, A.-Y., Yu, N., Huang, S.-J., Hung, C.-T., Liu, S.-H., Lei, Z., Kuo, C.-T., & Liu, S.-B. (2011). Fabrication of CNTs with controlled diameters and their applications as electrocatalyst supports for DMFC. DIAMOND AND RELATED MATERIALS, 20(3), 343–350. https://doi.org/10.1016/j.diamond.2011.01.002
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/352