Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
165 | en_US |
dc.citation.issue |
2 | en_US |
dc.citation.spage |
162 | en_US |
dc.citation.volume |
63 | en_US |
dc.citation.woscount |
21 | |
dc.contributor.author |
Chang, K. M. | en_US |
dc.contributor.author |
Chao, C. G. | en_US |
dc.contributor.author |
Liu, T. F. | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:06:35Z | |
dc.date.available |
2014-12-08T15:06:35Z | |
dc.date.issued |
2010-07-01 | en_US |
dc.description.abstract |
An optimal aging at 450 degrees C resulting in the subject alloy possessing a high yield strength of 1383 MPa with 32.5% elongation. With almost equivalent elongation, the yield strength was about 28% higher than that of FeAlMnC (C <= 1.3 wt.%) alloys after solution heat-treatment or controlled-rolling followed by optimal aging. Additionally, due to pre-existing fine (Fe,Mn)(3)AlC carbides in as-quenched alloy, the aging time required for attaining the optimal combination of strength and ductility was much less than that for FeAlMnC (C <= 1.3 wt.%) alloys. (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.scriptamat.2010.03.038 | en_US |
dc.identifier.issn |
1359-6462 | en_US |
dc.identifier.journal |
SCRIPTA MATERIALIA | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.scriptamat.2010.03.038 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/5159 | |
dc.identifier.wosnumber |
WOS:000278532400004 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Spinodal decomposition | en_US |
dc.subject |
Carbides | en_US |
dc.subject |
Microstructure | en_US |
dc.subject |
Mechanical properties | en_US |
dc.subject |
FeAlMnC alloy | en_US |
dc.title |
Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy | en_US |
dc.type |
Article | en_US |
檔案
- 000278532400004.pdf (500.3 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chang, K. M., Chao, C. G., & Liu, T. F. (2010). Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy. SCRIPTA MATERIALIA, 63(2), 162–165. https://doi.org/10.1016/j.scriptamat.2010.03.038
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/5159