Design the Remote Control System With the Time-Delay Estimator and the Adaptive Smith Predictor
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
80 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
73 | en_US |
dc.citation.volume |
6 | en_US |
dc.citation.woscount |
29 | |
dc.contributor.author |
Lai, Chien-Liang | en_US |
dc.contributor.author |
Hsu, Pau-Lo | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:07:26Z | |
dc.date.available |
2014-12-08T15:07:26Z | |
dc.date.issued |
2010-02-01 | en_US |
dc.description.abstract |
In real applications, a remote control system is generally an integration of different networks consisting of a commercial network for message transmission and an industrial network to control the remote hardware through a communication gateway. Since the induced time-delay in network control system (NCS) may cause system instability, this paper proposes a remote NCS structure by implementing the adaptive Smith predictor with an online time-delay estimator. As the delay in a commercial network Ethernet is significantly time-varying depending on the number of end-users, the delay is estimated in this paper by processing the online measurement of the round-trip time (RTT) between the application layers of the server and the client. The adaptive Smith predictor control scheme is developed by directly applying the estimated time-delay. To prove the feasibility of the proposed remote control system, the developed design has been applied to an AC 400 W servo motor tested from a 15 km distance. The experimental results indicate that the significantly improved stability and motion accuracy can be reliably achieved by applying the proposed approach. | en_US |
dc.identifier.doi |
10.1109/TII.2009.2037917 | en_US |
dc.identifier.issn |
1551-3203 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TII.2009.2037917 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/5863 | |
dc.identifier.wosnumber |
WOS:000274383700010 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Adaptive Smith predictor | en_US |
dc.subject |
controller area network (CAN) | en_US |
dc.subject |
Ethernet | en_US |
dc.subject |
networked control system (NCS) | en_US |
dc.subject |
remote control | en_US |
dc.subject |
time-delay | en_US |
dc.title |
Design the Remote Control System With the Time-Delay Estimator and the Adaptive Smith Predictor | en_US |
dc.type |
Article | en_US |
檔案
- 000274383700010.pdf (963.7 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lai, C.-L., & Hsu, P.-L. (2010). Design the Remote Control System With the Time-Delay Estimator and the Adaptive Smith Predictor. IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 6(1), 73–80. https://doi.org/10.1109/TII.2009.2037917
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/5863