Measurements of respirable dust and nanoparticle concentrations in a titanium dioxide pigment production factory
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1233 | en_US |
dc.citation.issue |
10 | en_US |
dc.citation.spage |
1227 | en_US |
dc.citation.volume |
45 | en_US |
dc.citation.woscount |
4 | |
dc.contributor.author |
Huang, Cheng-Hsiung | en_US |
dc.contributor.author |
Tai, Chih-Yuan | en_US |
dc.contributor.author |
Huang, Cheng-Yu | en_US |
dc.contributor.author |
Tsai, Chuen-Jinn | en_US |
dc.contributor.author |
Chen, Chun-Wan | en_US |
dc.contributor.author |
Chang, Cheng-Ping | en_US |
dc.contributor.author |
Shih, Tung-Sheng | en_US |
dc.contributor.department |
環境工程研究所 | zh_TW |
dc.contributor.department |
Institute of Environmental Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:07:44Z | |
dc.date.available |
2014-12-08T15:07:44Z | |
dc.date.issued |
2010 | en_US |
dc.description.abstract |
This study compared respirable dust and nanoparticle concentrations measured by different sampling devices at a titanium dioxide pigment factory. Respirable particle mass concentrations, nanoparticle concentrations, particle size distribution and particle metallic content were measured at different sampling locations. The sampling results of the Multi-orifice Uniform Deposit Impactor (MOUDI) showed that the particle size distribution at this titanium dioxide production factory fell in the range of 1-10 mu m. Generally, the higher levels of the respirable particle mass concentrations and nanoparticle number concentrations were near the packing site of the pigment titanium dioxide production factory. Metal analysis results revealed that the titanium dioxide concentrations in respirable dust and nanoparticles were within the limits specified by National Institute for Occupational Safety and Health (NIOSH). During sampling, particle metallic content analysis is essential for identifying the source of particles and for measuring respirable dust and nanoparticle concentrations. | en_US |
dc.identifier.doi |
10.1080/10934529.2010.493792 | en_US |
dc.identifier.issn |
1093-4529 | en_US |
dc.identifier.journal |
JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1080/10934529.2010.493792 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/6075 | |
dc.identifier.wosnumber |
WOS:000284098600001 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Respirable dust | en_US |
dc.subject |
nanoparticles | en_US |
dc.subject |
particle concentration | en_US |
dc.subject |
titanium dioxide | en_US |
dc.title |
Measurements of respirable dust and nanoparticle concentrations in a titanium dioxide pigment production factory | en_US |
dc.type |
Article | en_US |
檔案
- 000284098600001.pdf (368.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Huang, C.-H., Tai, C.-Y., Huang, C.-Y., Tsai, C.-J., Chen, C.-W., Chang, C.-P., & Shih, T.-S. (2010). Measurements of respirable dust and nanoparticle concentrations in a titanium dioxide pigment production factory. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, 45(10), 1227–1233. https://doi.org/10.1080/10934529.2010.493792
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6075