Design of Sub-90 nm Low-Power and Variation Tolerant PD/SOI SRAM Cell Based on Dynamic Stability Metrics
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
976 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
965 | en_US |
dc.citation.volume |
44 | en_US |
dc.citation.woscount |
8 | |
dc.contributor.author |
Joshi, Rajiv V. | en_US |
dc.contributor.author |
Mukhopadhyay, Saibal | en_US |
dc.contributor.author |
Plass, Donald W. | en_US |
dc.contributor.author |
Chan, Yuen H. | en_US |
dc.contributor.author |
Chuang, Ching-Te | en_US |
dc.contributor.author |
Tan, Yue | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.date.accessioned |
2014-12-08T15:09:50Z | |
dc.date.available |
2014-12-08T15:09:50Z | |
dc.date.issued |
2009-03-01 | en_US |
dc.description.abstract |
In this paper we have studied the impacts of floating body effect, device leakage, and gate oxide tunneling leakage on the read and write-ability of a PD/SOI CMOS SRAM cell under Vt, L and W variations in sub-100 nm technology for the first time. The floating body effect is shown to degrade the read stability while improving the write-ability. On the other hand, the gate-to-body tunneling current improves the read stability while degrading the write-ability. It is also shown that the use of high-Vt and thick oxide cell transistors can improve leakage, read and write-ability without causing significant performance degradation. The test-chip is fabricated in sub-90 nm SOI technology to show the effectiveness of high-Vt and thick-oxide devices in improving stability of SRAM cells. | en_US |
dc.identifier.doi |
10.1109/JSSC.2009.2013768 | en_US |
dc.identifier.issn |
0018-9200 | en_US |
dc.identifier.journal |
IEEE JOURNAL OF SOLID-STATE CIRCUITS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/JSSC.2009.2013768 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/7535 | |
dc.identifier.wosnumber |
WOS:000263918900026 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Dynamic stability | en_US |
dc.subject |
high-Vt | en_US |
dc.subject |
process variation | en_US |
dc.subject |
SRAM | en_US |
dc.subject |
thick oxide | en_US |
dc.subject |
write-ability | en_US |
dc.title |
Design of Sub-90 nm Low-Power and Variation Tolerant PD/SOI SRAM Cell Based on Dynamic Stability Metrics | en_US |
dc.type |
Article | en_US |
檔案
- 000263918900026.pdf (2.11 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Joshi, R. V., Mukhopadhyay, S., Plass, D. W., Chan, Y. H., Chuang, C.-T., & Tan, Y. (2009). Design of Sub-90 nm Low-Power and Variation Tolerant PD/SOI SRAM Cell Based on Dynamic Stability Metrics. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 44(3), 965–976. https://doi.org/10.1109/JSSC.2009.2013768
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7535