Enhanced Efficiency of Dye-Sensitized Solar Cells Using Anodic Titanium Oxide Nanotube Arrays
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
C312 | en_US |
dc.citation.issue |
9 | en_US |
dc.citation.spage |
C304 | en_US |
dc.citation.volume |
156 | en_US |
dc.citation.woscount |
20 | |
dc.contributor.author |
Chen, Chien Chon | en_US |
dc.contributor.author |
Jehng, Wern Dare | en_US |
dc.contributor.author |
Li, Lu Lin | en_US |
dc.contributor.author |
Diau, Eric Wei-Guang | en_US |
dc.contributor.department |
應用化學系 | zh_TW |
dc.contributor.department |
應用化學系分子科學碩博班 | zh_TW |
dc.contributor.department |
Department of Applied Chemistry | en_US |
dc.contributor.department |
Institute of Molecular science | en_US |
dc.date.accessioned |
2014-12-08T15:10:19Z | |
dc.date.available |
2014-12-08T15:10:19Z | |
dc.date.issued |
2009 | en_US |
dc.description.abstract |
This paper concerns the microstructure of the anodic titanium oxide (ATO, TiO(2)) nanotube (NT) and its use for the dye-sensitized solar cell (DSSC) device. The ATO length was controlled by various electrolytes and anodic time at various constant applied voltages. The lengths of the NTs at 0.3-0.5 and 0.9-22 mu m were controlled by 0.5 vol % HF and 0.58 wt % KF aqueous solutions for varied periods of anodization (1-24 h). The 0.5 wt % NH(4)F electrolyte in ethylene glycol can produce 4-41 mu m for varied periods of anodization (0.5-8 h). ATO made of 0.3 (0.5 vol % HF), 12 (0.5 wt % KF), and 18 mu m (0.5 wt % NH(4)F) was used for the DSSC anode; the best cell performance attained 0.13, 3.76, and 6.18%. The DSSC made of 18 mu m ATO has a short-circuit current density (J(sc)) of 13.45 mA/cm(2), a fill factor of 0.64, an open voltage (V(oc)) of 0.72 V, and a photocurrent efficiency of 6.18% under an air mass 1.5 illumination test. | en_US |
dc.identifier.doi |
10.1149/1.3153288 | en_US |
dc.identifier.issn |
0013-4651 | en_US |
dc.identifier.journal |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1149/1.3153288 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/7881 | |
dc.identifier.wosnumber |
WOS:000268405400028 | |
dc.language.iso |
en_US | en_US |
dc.subject |
anodisation | en_US |
dc.subject |
electrolytes | en_US |
dc.subject |
nanotube devices | en_US |
dc.subject |
nanotubes | en_US |
dc.subject |
photoconductivity | en_US |
dc.subject |
solar cells | en_US |
dc.subject |
titanium compounds | en_US |
dc.title |
Enhanced Efficiency of Dye-Sensitized Solar Cells Using Anodic Titanium Oxide Nanotube Arrays | en_US |
dc.type |
Article | en_US |
檔案
- 000268405400028.pdf (2.06 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chen, C. C., Jehng, W. D., Li, L. L., & Diau, E. W.-G. (2009). Enhanced Efficiency of Dye-Sensitized Solar Cells Using Anodic Titanium Oxide Nanotube Arrays. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 156(9), C304–C312. https://doi.org/10.1149/1.3153288
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7881