Fabrication and CO Sensing Properties of Mesostructured ZnO Gas Sensors
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
J19 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
J16 | en_US |
dc.citation.volume |
156 | en_US |
dc.citation.woscount |
20 | |
dc.contributor.author |
Liu, Chueh-Yang | en_US |
dc.contributor.author |
Chen, Chia-Fu | en_US |
dc.contributor.author |
Leu, Jih-Perng | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:10:20Z | |
dc.date.available |
2014-12-08T15:10:20Z | |
dc.date.issued |
2009 | en_US |
dc.description.abstract |
This study presents the synthesis of mesostructured ZnO using a template replication method and the fabrication of a carbon monoxide sensor using the synthesized ZnO using the dielectrophoresis process. The mesoporous carbon, CMK-3, was employed for the template and zinc nitrite was used as the precursor for synthesizing the ordered porous ZnO. The mesostructured ZnO was analyzed using X-ray diffraction (XRD) patterns, scanning electron microscopy, transmission electron microscopy, selected area electron diffraction, and N(2) adsorption-desorption isotherms. The XRD patterns indicated that the ZnO exhibited a highly ordered structure after the template was removed. The morphology of the ZnO was randomly oriented and the structure was polycrystalline. The surface area, pore volume, and pore size of the porous ZnO were 61.3 m(2) g(-1), 0.31 cm(3) g(-1), and 5.3 nm, respectively. When CO gas was injected, the optimum sensitivities at 250 degrees C were 12.1, 14.6, 18.4, 26.0, and 60% when the CO concentrations were 10, 20, 30, 50, and 70 ppm, respectively. | en_US |
dc.identifier.doi |
10.1149/1.3021044 | en_US |
dc.identifier.issn |
0013-4651 | en_US |
dc.identifier.journal |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1149/1.3021044 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/7889 | |
dc.identifier.wosnumber |
WOS:000261209800084 | |
dc.language.iso |
en_US | en_US |
dc.subject |
adsorption | en_US |
dc.subject |
carbon compounds | en_US |
dc.subject |
desorption | en_US |
dc.subject |
electron diffraction | en_US |
dc.subject |
electrophoresis | en_US |
dc.subject |
gas sensors | en_US |
dc.subject |
II-VI semiconductors | en_US |
dc.subject |
scanning electron microscopy | en_US |
dc.subject |
transmission electron microscopy | en_US |
dc.subject |
wide band gap semiconductors | en_US |
dc.subject |
X-ray diffraction | en_US |
dc.subject |
zinc compounds | en_US |
dc.title |
Fabrication and CO Sensing Properties of Mesostructured ZnO Gas Sensors | en_US |
dc.type |
Article | en_US |
檔案
- 000261209800084.pdf (532.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liu, C.-Y., Chen, C.-F., & Leu, J.-P. (2009). Fabrication and CO Sensing Properties of Mesostructured ZnO Gas Sensors. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 156(1), J16–J19. https://doi.org/10.1149/1.3021044
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/7889