Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1593 | en_US |
dc.citation.issue |
7 | en_US |
dc.citation.spage |
1589 | en_US |
dc.citation.volume |
49 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Tuan, Yi Hsuan | en_US |
dc.contributor.author |
Lin, Chih Lung | en_US |
dc.contributor.author |
Chao, Chuen Guang | en_US |
dc.contributor.author |
Liu, Tzeng Feng | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:11:13Z | |
dc.date.available |
2014-12-08T15:11:13Z | |
dc.date.issued |
2008-07-01 | en_US |
dc.description.abstract |
The as-quenched microstructure of the Fe-30%Mn-9%Al-5%Cr-0.7%C (in mass%) alloy was single-phase austenite. When the as-quenched alloy was aged at 550 degrees C-750 degrees C, fine (Fe,Mn)(3)AlC carbides were formed within the austenite matrix. In addition, as the aging temperature increased, a M7C3 carbide + D0(3) -> M7C3 carbide + B-2 -> M7C3 carbide + alpha (ferrite) phase transition had occurred on the grain boundaries. This grain boundary precipitation behavior has never before been observed in FeMnAlC and FeMnAlCrC alloy systems. | en_US |
dc.identifier.doi |
10.2320/matertrans.MRA2008060 | en_US |
dc.identifier.issn |
1345-9678 | en_US |
dc.identifier.journal |
MATERIALS TRANSACTIONS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.2320/matertrans.MRA2008060 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/8614 | |
dc.identifier.wosnumber |
WOS:000258810900016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
transmission electron microscopy | en_US |
dc.subject |
carbides | en_US |
dc.subject |
ordering | en_US |
dc.subject |
austenitic iron aluminum manganese chromium carbon alloy | en_US |
dc.title |
Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy | en_US |
dc.type |
Article | en_US |
檔案
- 000258810900016.pdf (359.1 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Tuan, Y. H., Lin, C. L., Chao, C. G., & Liu, T. F. (2008). Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy. MATERIALS TRANSACTIONS, 49(7), 1589–1593. https://doi.org/10.2320/matertrans.MRA2008060
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/8614