Thermal and mechanical properties of polyimide/nano-silica hybrid films
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
5242 | en_US |
dc.citation.issue |
15 | en_US |
dc.citation.spage |
5238 | en_US |
dc.citation.volume |
519 | en_US |
dc.citation.woscount |
7 | |
dc.contributor.author |
Tsai, Mei-Hui | en_US |
dc.contributor.author |
Huang, Yi-Chia | en_US |
dc.contributor.author |
Tseng, I-Hsiang | en_US |
dc.contributor.author |
Yu, Hsin-Pei | en_US |
dc.contributor.author |
Lin, Yin-Kai | en_US |
dc.contributor.author |
Huang, Shih-Liang | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:11:32Z | |
dc.date.available |
2014-12-08T15:11:32Z | |
dc.date.issued |
2011-05-31 | en_US |
dc.description.abstract |
A novel route to synthesize polyimide (PI)/silica hybrid films with improved thermal and mechanical properties was developed. Low-molecular-weight poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized by controlling the molar ratio of monomers, [4,4'-(4,4'-isopropylidenediphenoxy) bis(phthalic anhydride)] (IDPA) and 2,2'-bis(4-(4-aminophenoxy)phenyl)propane (BAPP). The PM with its low-molecule-weight feature showed good compatibility with silica-sol and dispersed well within the network of silica-sol. Silica nanoparticles with an average size of 20 nm were obtained without adding coupling agents and dispersed homogenously within the resulting PI/silica hybrid films due to the hydrogen bonding between Si-OH groups and C=O in imide rings of polyimide. The improvement in the storage modulus and the coefficient of thermal expansion (CTE) by hybrid films was revealed. With the presence of 50 wt.% silica in hybrid films, the storage modulus was 5857 MPa and the CTE was 18.1 ppm/degrees C. compared with 1620 MPa and 76.5 ppm/degrees C for pure PI. Most importantly, the transmission at 550 nm was 81.4% for the hybrid film with 50 wt.% silica, which is close to 87.5% for pure PI. The CTE of the hybrid film dropped to the level comparable with that of copper without sacrificing its transparency, which was associated with the well-dispersed silica nanoparticles and the semi-interpenetrating polymer network (semi-IPN) structure within the PI matrix. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2011.01.167 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2011.01.167 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/8835 | |
dc.identifier.wosnumber |
WOS:000292471400121 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Polyimide | en_US |
dc.subject |
Silica | en_US |
dc.subject |
Coefficient of thermal expansion | en_US |
dc.subject |
Hybrid films | en_US |
dc.subject |
Transmittance | en_US |
dc.title |
Thermal and mechanical properties of polyimide/nano-silica hybrid films | en_US |
dc.type |
Article | en_US |
檔案
- 000292471400121.pdf (980.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Tsai, M.-H., Huang, Y.-C., Tseng, I.-H., Yu, H.-P., Lin, Y.-K., & Huang, S.-L. (2011). Thermal and mechanical properties of polyimide/nano-silica hybrid films. THIN SOLID FILMS, 519(15), 5238–5242. https://doi.org/10.1016/j.tsf.2011.01.167
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/8835