Effect of Si-die dimensions on electromigration failure time of flip-chip solder joints
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
90 | en_US |
dc.citation.issue |
1-2 | en_US |
dc.citation.spage |
85 | en_US |
dc.citation.volume |
127 | en_US |
dc.citation.woscount |
1 | |
dc.contributor.author |
Chang, Y. W. | en_US |
dc.contributor.author |
Chiu, S. H. | en_US |
dc.contributor.author |
Chen, Chih | en_US |
dc.contributor.author |
Yao, D. J. | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:11:33Z | |
dc.date.available |
2014-12-08T15:11:33Z | |
dc.date.issued |
2011-05-16 | en_US |
dc.description.abstract |
Electromigration tests were performed for solder joints with various Si dies thickness and area. For the electro-migration in flip-chip solder joints with a 60, 100.250 and 760 mu m thick Si die, it is found that Si-die thickness has profound influence on electro-migration lifetime. The average failure time was 1608.0 h for joints with a 760-mu m-thick die when they are stressed by 1.0 A at 100 degrees C. However, it decreased significantly to 0.6 h for joints with a 60-mu m-thick die. According to the temperature measured by infrared microscopy, solder joints with a thinner die has a higher Joule heating effect, which results in a shorter electromigration lifetime. In addition, the die area has a considerable influence on the electromigration failure time. The electromigration failure time decreases as the die area decreases. The average failure time is 1608.0,28.0, 10.6,5.0 and 0.3 h for the solder joints with die area of 5350 x 4350 mu m(2), 5350 x 3600 mu m(2), 5350 x 3000 mu m(2), 5350 x 2000 mu m(2) and 5350 x 1000 mu m(2), respectively. The Joule heating effect becomes more serious in smaller dies, which causes a shorter electromigration lifetime. (C) 2011 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.matchemphys.2011.01.023 | en_US |
dc.identifier.issn |
0254-0584 | en_US |
dc.identifier.journal |
MATERIALS CHEMISTRY AND PHYSICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.matchemphys.2011.01.023 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/8850 | |
dc.identifier.wosnumber |
WOS:000289322800016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Thermal conductivity | en_US |
dc.subject |
Diffusion | en_US |
dc.subject |
Electrical properties | en_US |
dc.subject |
Thermal properties | en_US |
dc.title |
Effect of Si-die dimensions on electromigration failure time of flip-chip solder joints | en_US |
dc.type |
Article | en_US |
檔案
- 000289322800016.pdf (826.2 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chang, Y. W., Chiu, S. H., Chen, C., & Yao, D. J. (2011). Effect of Si-die dimensions on electromigration failure time of flip-chip solder joints. MATERIALS CHEMISTRY AND PHYSICS, 127(1-2), 85–90. https://doi.org/10.1016/j.matchemphys.2011.01.023
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/8850