Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
525 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
521 | en_US |
dc.citation.volume |
52 | en_US |
dc.citation.woscount |
3 | |
dc.contributor.author |
Tsay, GowDong | en_US |
dc.contributor.author |
Tuan, YiHsuan | en_US |
dc.contributor.author |
Lin, ChihLung | en_US |
dc.contributor.author |
Chao, ChuenGuang | en_US |
dc.contributor.author |
Liu, TzengFeng | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:11:56Z | |
dc.date.available |
2014-12-08T15:11:56Z | |
dc.date.issued |
2011-03-01 | en_US |
dc.description.abstract |
The supersaturated austenite (gamma) phase decomposed into fine C-rich ordered k' particles and C-depleted gamma(0) phase during quenching in alloys with 5.5 <= C <= 8.0 at%. The misfit between k' particles and gamma(0) phase decreased with increasing carbon content. The strain energy increased dramatically as carbon content approached slightly below 5.5 at%. Undercooling may be insufficient to overcome the strain energy effects, thus leading to the absence of spinodal decomposition and k' particles in the present and prior austemtic FeMnAlC alloys with 3.1 <= C <= 5.2 at% under the as-quenched condition. Additionally, both the amount of ordered k' particles and the carbon concentration in the k' particles increased with increasing carbon content of the alloy. These results revealed that a higher degree of carbon supersaturation in the initial gamma phase might promote a tendency toward C-rich k' particle formation during quenching. [doi:10.2320/matertrans.M2010255] | en_US |
dc.identifier.doi |
10.2320/matertrans.M2010255 | en_US |
dc.identifier.issn |
1345-9678 | en_US |
dc.identifier.journal |
MATERIALS TRANSACTIONS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.2320/matertrans.M2010255 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/9161 | |
dc.identifier.wosnumber |
WOS:000290461000045 | |
dc.language.iso |
en_US | en_US |
dc.subject |
spinodal decomposition | en_US |
dc.subject |
ordered k ' particle | en_US |
dc.subject |
X-ray diffraction | en_US |
dc.subject |
transmission electron microscopy | en_US |
dc.subject |
iron manganese aluminum carbon alloy | en_US |
dc.title |
Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys | en_US |
dc.type |
Article | en_US |
檔案
- 000290461000045.pdf (1.06 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Tsay, G., Tuan, Y., Lin, C., Chao, C., & Liu, T. (2011). Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys. MATERIALS TRANSACTIONS, 52(3), 521–525. https://doi.org/10.2320/matertrans.M2010255
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/9161