A wafer-level hermetic encapsulation for MEMS manufacture application
檔案
- 000239707900017.pdf (3.55 MB, Adobe PDF)
日期
2006-08-01
類型
期刊名稱
IEEE TRANSACTIONS ON ADVANCED PACKAGING
卷期與頁次
第 29 卷第 3 期,頁 513–519
ISSN
1521-3323
語言
英文
摘要
In order to simplify the processing complexity and cut down the manufacturing cost, a new wafer bonding technique using ultraviolet (UV) curable adhesive is introduced here for microelectromechanical systems (MEMS) device packaging and manufacturing applications. UV curable adhesive is cured through UV light exposure without any heating process that is suitable for the packaging of temperature-sensitive materials or devices. A Pyrex 7740 glass is chemically wet etched to form microcavities and utilized as the protection cap substrate. After a UV-curable adhesive is spin-coated onto the glass substrate, the substrate is then aligned and bonded through UV light exposure with a device substrate below. Electrical contact pad opening and die separation are done simultaneously by dicing. Two different testing devices, a dew point sensor and capacitive accelerometer, are built to evaluate the package strength and hermeticity. After the dicing process, no structural damage or stiction phenomenon is found in the packaged parallel capacitor. The acceleration test results also indicate that the package using the Loctite 3491 UV adhesive with 150 mu m bond width can survive more than 300 days at a 25 degrees C and 100% relative humidity working environment.
關鍵詞
acceleration testsdriven-out spin methodhermetic encapsulationlow-temperature wafer bondingmicroelectromechanical systems (MEMS) manufacturingpost-processultraviolet (UV) adhesivewafer-level packaging所屬典藏
期刊論文引用此條目
Liang, Z.-H., Cheng, Y.-T., Hsu, W., & Lee, Y.-W. (2006). A wafer-level hermetic encapsulation for MEMS manufacture application. IEEE TRANSACTIONS ON ADVANCED PACKAGING, 29(3), 513–519. https://doi.org/10.1109/TADVP.2006.875092
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11965