Electromigration studies of flip chip Sn95/Sb5 solder bumps on Cr/Cr-Cu/Cu under-bump metallization

Abstract

The electromigration-induced failure of Sn95/Sb5 flip chip solder bumps was investigated. The failure of the joints was found at the cathode/chip side after current stressing with a density of 1 X 10(4) A/cm(2) at 150degreesC for 13 sec. The growth of intermetallic compounds (IMCs) was observed at the anode side after current stressing. Voids were found near the current crowding area in the cathode/chip side, and the (Cu,Ni)(6)Sn-5 IMC at the cathode/chip end was transformed into the Sn phase. The failure mechanism for Sn95/Sb5 flip chip solder joint is proposed in this paper.