Investigation of Cu/TaN metal gate for metal-oxide-silicon devices

檔案

日期

2003-01-01

類型

期刊名稱

JOURNAL OF THE ELECTROCHEMICAL SOCIETY

卷期與頁次

第 150 卷第 1 期,頁 G22–G27

ISSN

0013-4651

語言

英文

摘要

This work investigates the work function modulation of TaNx films and the thermal stability of Cu/TaNx stack as a gate electrode for metal-oxide-silicon devices. The N/Ta ratio was varied in the range of 0.30-0.65 by using reactive-sputter deposition with various Ar/N-2 mass flow ratios. The TaNx films are almost amorphous and are thermally stable up to 800degreesC. However, the formation of Ta3N5 phase in a film with a high N/Ta ratio or annealed at high temperature increases the resistivity. The work function of TaNx is about 4.31-4.38 eV and the modulation is less than 70 mV. Such a short range modulation of the work function implies that TaNx is only suitable to be a gate electrode of surface channel n-channel metal oxide semiconductor field effect transistors (NMOSFETs). The mean value of the flatband voltage decreases and the deviation of the flatland voltage increases with the increase of the annealing temperature. Although phase change, grain growth, and Cu contamination contribute to the instability at high temperature, thermal stress-induced oxide charges dominate this decrease and deviation of the flatband voltage at temperature below 500degreesC. According to the material and electrical analysis, the Cu/TaNx stack gate electrode can be used for NMOSFETs only, and the maximum process temperature following gate electrode deposition should be lower than 500degreesC. (C) 2002 The Electrochemical Society.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Tsui, B., & Huang, C. (2003). Investigation of Cu/TaN metal gate for metal-oxide-silicon devices. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 150(1), G22–G27. https://doi.org/10.1149/1.1522723

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28243