軟性液晶顯示器配向膜及其光電特性影響之研究

The Study of Alignment Layer Effects on Flexible Liquid Crystal Display

檔案

本條目沒有附加檔案。

日期

2008

類型

補助單位

行政院國家科學委員會

計畫編號

NSC97-2221-E009-037

語言

中文

摘要

本計畫提出開發可適用於高階軟性液晶模組的液晶配向膜,針對控制
液晶配向膜及畫素微結構之觀念性構想,建立完整液晶配向膜評估系統的
前瞻技術。研發的重點將利用傳統磨擦配向膜與非接觸式之電漿束配向
製程,建立一套完整的製造及量測技術,以評估不同配向膜材料在處理過
程中對液晶盒之光電特性之影響。計劃中將以穿透式之光學補償彎曲液
晶(OCB)及反射式之膽固醇液晶(CLC)為平台,深入探討不同的配向膜材
料在不同的配向方式處理下,液晶盒光電特性與液晶配向膜之預傾角及表
面錨定能、配向膜表面化學鍵結特性及薄膜光學特性之相關性,並架設二
維陣列光彈性調制(Photoeleastic Modulator)-橢圓儀(Ellipsometer)之量測
原型設備(prototype)。針對液晶盒光電特性的影響,建立一套完整的表面
處理資料庫。期在研發完成後,能提供低溫配向膜製程條件及液晶配向膜
評估系統,藉由適當的管道移轉至產業界,使國內面板廠能應用此技術,
衍生未來具高附加價值的高階軟性液晶顯示器。
The research goal of this project is to develop a novel low temperature
alignment process for high-end flexible liquid crystal display applications.
The study includes controlling alignment surface, pixel micro-structure design,
and alignment evaluation system. Both rubbing and plasma beam alignment
processes will be applied and will be evaluated their effectiveness on various
alignment materials. The optically compensated bend mode liquid crystal
(OCB) and chiral nematic liquid crystals (CLC) will be the vehicles for this
study. The surface pretilt angle, surface anchoring energy, surface chemical
structures, thin film optical properties will be investigated and compared with
their cell electro-optical properties. In order to measure the thin film
properties, a prototype of 2D-Photoeleastic Modulator Ellipsometer (2D PEMEllipsometer)
will be setup along this research. The data acquired from this
homemade instrument will provide valuable process information and will be
benefit to the future flexible liquid crystal display manufactures.

所屬典藏

研究計畫
顯示完整詮釋資料 統計資料

引用此條目

陳皇銘, & Chen Huang-Ming Phil (2008). 軟性液晶顯示器配向膜及其光電特性影響之研究. https://ir.lib.nycu.edu.tw/handle/11536/102520

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/102520