Design and development of a new machine vision wire bonding inspection system
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
334 | en_US |
dc.citation.issue |
3-4 | en_US |
dc.citation.spage |
323 | en_US |
dc.citation.volume |
34 | en_US |
dc.citation.woscount |
8 | |
dc.contributor.author |
Perng, Der-Baau | en_US |
dc.contributor.author |
Chou, Cheng-Chuan | en_US |
dc.contributor.author |
Lee, Shu-Ming | en_US |
dc.contributor.department |
工業工程與管理學系 | zh_TW |
dc.contributor.department |
Department of Industrial Engineering and Management | en_US |
dc.date.accessioned |
2014-12-08T15:13:28Z | |
dc.date.available |
2014-12-08T15:13:28Z | |
dc.date.issued |
2007-09-01 | en_US |
dc.description.abstract |
In this paper, we developed a fast and robust machine vision system for wire bonding inspection. The defects caused by a bonding wire being broken, lost, shifted, shorted, or sagged in an integrated circuit (IC) chip can be inspected automatically. A new lighting environment was devised which will highlight the slope of the bonding wire and suppress the background from being extracted. First, a set of machine vision algorithms were designed to filter out the defects of broken wire, lost wire, shifted wire, and shorted-out wire. Second, the 3-D type defect of sagged wire can be detected by inspecting the change of the bonding wire slope, derived from a single 2-D image. Some illustrations are given to show the efficiency and effectiveness of the proposed novel wire bonding vision inspection system. | en_US |
dc.identifier.doi |
10.1007/s00170-006-0611-6 | en_US |
dc.identifier.issn |
0268-3768 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1007/s00170-006-0611-6 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/10410 | |
dc.identifier.wosnumber |
WOS:000248833200014 | |
dc.language.iso |
en_US | en_US |
dc.subject |
machine vision | en_US |
dc.subject |
wire bonding inspection | en_US |
dc.subject |
lighting environment | en_US |
dc.title |
Design and development of a new machine vision wire bonding inspection system | en_US |
dc.type |
Article | en_US |
檔案
- 000248833200014.pdf (636.8 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Perng, D.-B., Chou, C.-C., & Lee, S.-M. (2007). Design and development of a new machine vision wire bonding inspection system. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 34(3-4), 323–334. https://doi.org/10.1007/s00170-006-0611-6
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/10410