Improvement of efficiency and ESD characteristics of ultraviolet light-emitting diodes by inserting AlGaN and SiN buffer layers
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
58 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
55 | en_US |
dc.citation.volume |
305 | en_US |
dc.citation.woscount |
5 | |
dc.contributor.author |
Huang, G. S. | en_US |
dc.contributor.author |
Kuo, H. C. | en_US |
dc.contributor.author |
Lo, M. H. | en_US |
dc.contributor.author |
Lu, T. C. | en_US |
dc.contributor.author |
Tsai, J. Y. | en_US |
dc.contributor.author |
Wang, S. C. | en_US |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2014-12-08T15:13:45Z | |
dc.date.available |
2014-12-08T15:13:45Z | |
dc.date.issued |
2007-07-01 | en_US |
dc.description.abstract |
We have studied the effect of the AlGaN insertion and SiN buffer layers of ultraviolet light-emitting diodes (UVLEDs) on efficiency and electrostatic discharge (ESD) characteristics of UVLEDs grown by metalorganic chemical vapor deposition. The etching pit density was reduced from 3.6 x 10(8) cm(-2) in conventional samples to 1.6 x 10(7) cm(-2) in UVLEDs grown with the AlGaN insertion layer and SiN buffer layer. During the ESD tests at the negative biases of 3000 V, the live percentage of UVLEDs increased from 67% in conventional samples to 86% in samples with AlGaN insertion layers and SiN buffer layers. In addition, the device shows a low leakage current of 1.1 x 10(-8) A at -5 V and the light output power was 70% higher than the conventional UVLEDs at an injection current of 20 mA. (c) 2007 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.jcrysgro.2007.04.022 | en_US |
dc.identifier.issn |
0022-0248 | en_US |
dc.identifier.journal |
JOURNAL OF CRYSTAL GROWTH | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.jcrysgro.2007.04.022 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/10627 | |
dc.identifier.wosnumber |
WOS:000247841300012 | |
dc.language.iso |
en_US | en_US |
dc.subject |
defects | en_US |
dc.subject |
metalorganic chemical vapor deposition | en_US |
dc.subject |
nitrides | en_US |
dc.subject |
light emitting diodes | en_US |
dc.title |
Improvement of efficiency and ESD characteristics of ultraviolet light-emitting diodes by inserting AlGaN and SiN buffer layers | en_US |
dc.type |
Article | en_US |
檔案
- 000247841300012.pdf (397.7 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Huang, G. S., Kuo, H. C., Lo, M. H., Lu, T. C., Tsai, J. Y., & Wang, S. C. (2007). Improvement of efficiency and ESD characteristics of ultraviolet light-emitting diodes by inserting AlGaN and SiN buffer layers. JOURNAL OF CRYSTAL GROWTH, 305(1), 55–58. https://doi.org/10.1016/j.jcrysgro.2007.04.022
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/10627