Improvement of efficiency and ESD characteristics of ultraviolet light-emitting diodes by inserting AlGaN and SiN buffer layers
檔案
- 000247841300012.pdf (397.7 KB, Adobe PDF)
日期
2007-07-01
類型
系所
期刊名稱
JOURNAL OF CRYSTAL GROWTH
卷期與頁次
第 305 卷第 1 期,頁 55–58
ISSN
0022-0248
語言
英文
摘要
We have studied the effect of the AlGaN insertion and SiN buffer layers of ultraviolet light-emitting diodes (UVLEDs) on efficiency and electrostatic discharge (ESD) characteristics of UVLEDs grown by metalorganic chemical vapor deposition. The etching pit density was reduced from 3.6 x 10(8) cm(-2) in conventional samples to 1.6 x 10(7) cm(-2) in UVLEDs grown with the AlGaN insertion layer and SiN buffer layer. During the ESD tests at the negative biases of 3000 V, the live percentage of UVLEDs increased from 67% in conventional samples to 86% in samples with AlGaN insertion layers and SiN buffer layers. In addition, the device shows a low leakage current of 1.1 x 10(-8) A at -5 V and the light output power was 70% higher than the conventional UVLEDs at an injection current of 20 mA. (c) 2007 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Huang, G. S., Kuo, H. C., Lo, M. H., Lu, T. C., Tsai, J. Y., & Wang, S. C. (2007). Improvement of efficiency and ESD characteristics of ultraviolet light-emitting diodes by inserting AlGaN and SiN buffer layers. JOURNAL OF CRYSTAL GROWTH, 305(1), 55–58. https://doi.org/10.1016/j.jcrysgro.2007.04.022
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/10627