Electrocoagulation of silica nanoparticles in wafer polishing wastewater by a multichannel flow reactor: A kinetic study
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
1658 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
1651 | en_US |
dc.citation.volume |
132 | en_US |
dc.citation.woscount |
6 | |
dc.contributor.author |
Den, Walter | en_US |
dc.contributor.author |
Huang, Chihpin | en_US |
dc.contributor.department |
環境工程研究所 | zh_TW |
dc.contributor.department |
Institute of Environmental Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:15:19Z | |
dc.date.available |
2014-12-08T15:15:19Z | |
dc.date.issued |
2006-12-01 | en_US |
dc.description.abstract |
A simplistic and systematic procedure has been developed for the design and upscaling of a multichannel, continuous-flow electrocoagulation reactor of monopolar configuration for the removal of submicron particles from wastewater, Using wastewater generated from the chemical-mechanical planarization process as the target wastewater, a series of laboratory-scale studies were conducted to determine the required operating conditions for the efficient removal of the ultrafine silica particles. These operating criteria included charge loading (>= 8 F/m(3)), current density (>= 5.7 A /m(2)), hydraulic retention time (>= 60 min), as well as the initial pH (7-10). Furthermore, a steady-state transport equation with second-order reaction kinetics was employed to describe the rate of coagulation as the rate-limiting factor. The actual kinetic constant determined from the laboratory-scale experiments was approximately 1.2 X 10(-21) m(3)/s, which was three orders of magnitude smaller than that calculated based on Brownian coagulation. The model was subsequently validated with a series of experiments using a pilot-scale electrocoagulation reactor geometrically similar to the laboratory-scale reactor with nearly 20 times volumetric scaleup. | en_US |
dc.identifier.doi |
10.1061/(ASCE)0733-9372(2006)132:12(1651) | en_US |
dc.identifier.issn |
0733-9372 | en_US |
dc.identifier.journal |
JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1061/(ASCE)0733-9372(2006)132:12(1651) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/11491 | |
dc.identifier.wosnumber |
WOS:000242430500016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
wastewater management | en_US |
dc.subject |
water treatment | en_US |
dc.subject |
silica | en_US |
dc.subject |
colloids | en_US |
dc.subject |
kinetics | en_US |
dc.subject |
coagulation | en_US |
dc.subject |
laminar flow | en_US |
dc.subject |
channel flow | en_US |
dc.title |
Electrocoagulation of silica nanoparticles in wafer polishing wastewater by a multichannel flow reactor: A kinetic study | en_US |
dc.type |
Article | en_US |
檔案
- 000242430500016.pdf (234.9 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Den, W., & Huang, C. (2006). Electrocoagulation of silica nanoparticles in wafer polishing wastewater by a multichannel flow reactor: A kinetic study. JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, 132(12), 1651–1658. https://doi.org/10.1061/(ASCE)0733-9372(2006)132:12(1651)
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11491