Electrocoagulation of silica nanoparticles in wafer polishing wastewater by a multichannel flow reactor: A kinetic study

檔案

日期

2006-12-01

類型

期刊名稱

JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE

卷期與頁次

第 132 卷第 12 期,頁 1651–1658

ISSN

0733-9372

語言

英文

摘要

A simplistic and systematic procedure has been developed for the design and upscaling of a multichannel, continuous-flow electrocoagulation reactor of monopolar configuration for the removal of submicron particles from wastewater, Using wastewater generated from the chemical-mechanical planarization process as the target wastewater, a series of laboratory-scale studies were conducted to determine the required operating conditions for the efficient removal of the ultrafine silica particles. These operating criteria included charge loading (>= 8 F/m(3)), current density (>= 5.7 A /m(2)), hydraulic retention time (>= 60 min), as well as the initial pH (7-10). Furthermore, a steady-state transport equation with second-order reaction kinetics was employed to describe the rate of coagulation as the rate-limiting factor. The actual kinetic constant determined from the laboratory-scale experiments was approximately 1.2 X 10(-21) m(3)/s, which was three orders of magnitude smaller than that calculated based on Brownian coagulation. The model was subsequently validated with a series of experiments using a pilot-scale electrocoagulation reactor geometrically similar to the laboratory-scale reactor with nearly 20 times volumetric scaleup.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Den, W., & Huang, C. (2006). Electrocoagulation of silica nanoparticles in wafer polishing wastewater by a multichannel flow reactor: A kinetic study. JOURNAL OF ENVIRONMENTAL ENGINEERING-ASCE, 132(12), 1651–1658. https://doi.org/10.1061/(ASCE)0733-9372(2006)132:12(1651)

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/11491